Priekaba su darbo platformaMÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Priekaba su darbo platforma
MÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
fiksuota kaina neįskaitant PVM
29 900 €
(35 581 € bruto)
Gamybos metai
2025
Sąlyga
Naujas
Vieta
Egestorf 

Rodyti vaizdus
Rodyti žemėlapį
Pagrindiniai duomenys
Kaina ir vieta
fiksuota kaina neįskaitant PVM
29 900 €
(35 581 € bruto)
- Pardavėjo vieta:
- Eichenstich 12, 21272 Egestorf, Vokietija

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 10 800 kg
- Bendras svoris:
- 14 400 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 6 270 mm
- Krovinių skyriaus plotis:
- 2 470 mm
Pasiūlymo informacija
- Sąrašo ID:
- A204-85-580
- Nuorodos Nr.:
- 62471a
- Naujinta paskutinį kartą:
- Data 2026.01.21
Aprašymas
* ETÜ-TA-R 14.4:
----Brakes:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizer assembly
----Drawbar / Flange Drawbar Eye:
Dsdpfx Aoxvgrpsfijkh
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm, up to 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with the option of display in the truck via EBS signal—no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
* Support winch at the front
* Outward folding rear supports
* Plastic toolbox approx. 858 x 500 x 500 mm mounted at the front right outside of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted 400 mm bulkhead made of smooth sheet metal
* Rear stanchions bolted
* Drop sides with spring assist
----Load Securing:
* Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t retractable lashing rings possible every 600 mm
* 1 x 6.3 t lashing point in each corner at the front and rear
* Various drilled holes in front and rear cross-members for 1.2 t lashing options
----Ramps:
* One-piece hydraulic grate drive-up ramps approx. 2,750 x 600 mm (can be retracted to 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from over 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front wall, mechanical fall supports and drive-up ramps hot-dip galvanized
* Axles, springs, air tanks, front support winch, and flange drawbar eye painted in black
* Sideboards painted in RAL 2011 deep orange
* Painting of side walls in an RAL colour available at extra cost
----Info:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
----Brakes:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with equalizer assembly
----Drawbar / Flange Drawbar Eye:
Dsdpfx Aoxvgrpsfijkh
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm, up to 2,250 mm
----Electrics / Lighting:
* Tire pressure monitoring with the option of display in the truck via EBS signal—no truck-side installation required
* 15-pin power connector
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
----General Attachments:
* Support winch at the front
* Outward folding rear supports
* Plastic toolbox approx. 858 x 500 x 500 mm mounted at the front right outside of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Deck:
* 50 mm softwood floor
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted 400 mm bulkhead made of smooth sheet metal
* Rear stanchions bolted
* Drop sides with spring assist
----Load Securing:
* Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t retractable lashing rings possible every 600 mm
* 1 x 6.3 t lashing point in each corner at the front and rear
* Various drilled holes in front and rear cross-members for 1.2 t lashing options
----Ramps:
* One-piece hydraulic grate drive-up ramps approx. 2,750 x 600 mm (can be retracted to 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from over 40 l/min up to max. 140 l/min)
----Paintwork:
* Chassis, drawbar, front wall, mechanical fall supports and drive-up ramps hot-dip galvanized
* Axles, springs, air tanks, front support winch, and flange drawbar eye painted in black
* Sideboards painted in RAL 2011 deep orange
* Painting of side walls in an RAL colour available at extra cost
----Info:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2001
Pateikti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
Mažas skelbimas
Egestorf
924 km
Priekaba su darbo platforma
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Mažas skelbimas
Egestorf
925 km
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida






























































