Priekaba su darbo platformaMÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Priekaba su darbo platforma
MÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
fiksuota kaina neįskaitant PVM
29 900 €
(35 581 € bruto)
Gamybos metai
2025
Sąlyga
Naujas
Vieta
Egestorf 

Rodyti vaizdus
Rodyti žemėlapį
Pagrindiniai duomenys
Kaina ir vieta
fiksuota kaina neįskaitant PVM
29 900 €
(35 581 € bruto)
- Vieta:
- Eichenstich 12, 21272 Egestorf, Deutschland

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 10 800 kg
- Bendras svoris:
- 14 400 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 6 270 mm
- Krovinių skyriaus plotis:
- 2 470 mm
Pasiūlymo informacija
- Sąrašo ID:
- A152-72-860
- Nuorodos Nr.:
- 6247a
- Naujinta paskutinį kartą:
- Data 2025.10.30
Aprašymas
* ETÜ-TA-R 14.4:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with equalizing unit
* Height-adjustable drawbar, adjustable by approx. 300 mm
* Drawbar extension by 250 mm to a total of 2,250 mm
* Tire pressure monitoring with indication (display) in the truck via EBS signal—without any truck-side installation required
* Support winch at front
* Exterior foldable support struts at rear
* 15-pin electrical plug
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
* Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Preparation at the front bulkhead for retrofitting container locks
* Bolted 400 mm smooth sheet metal bulkhead
* Bolted rear stanchions
* Side walls with spring assist
* Perforated outer frame, bent approx. 45° with 2 t lashing capacity every 480 mm, possible installation of 3 t drop lashing rings every 600 mm, in each front and rear corner 1 x 6.3 t lashing ring, various mounting holes in the front and rear crossmembers for 1.2 t lashing options
* One-piece hydraulic grating ramps approx. 2,750 x 600 mm (collapsible to 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 l/min up to max. 140 l/min)
* Chassis, drawbar, bulkhead, mechanical drop supports, and access ramps hot-dip galvanized
* Axles, springs, air tanks, front support winch, and flange draw eye painted in black
* Side wall painting in RAL 9010 pure white
* Painting of the side panels in a RAL color of your choice available at an extra charge
* New vehicle with manufacturer's warranty
* Errors and intermediate sale excepted
* Immediately available ex Egestorf
Dsdpfx Adorwc R Rj Teul
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with equalizing unit
* Height-adjustable drawbar, adjustable by approx. 300 mm
* Drawbar extension by 250 mm to a total of 2,250 mm
* Tire pressure monitoring with indication (display) in the truck via EBS signal—without any truck-side installation required
* Support winch at front
* Exterior foldable support struts at rear
* 15-pin electrical plug
* LED lighting system 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
* Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Preparation at the front bulkhead for retrofitting container locks
* Bolted 400 mm smooth sheet metal bulkhead
* Bolted rear stanchions
* Side walls with spring assist
* Perforated outer frame, bent approx. 45° with 2 t lashing capacity every 480 mm, possible installation of 3 t drop lashing rings every 600 mm, in each front and rear corner 1 x 6.3 t lashing ring, various mounting holes in the front and rear crossmembers for 1.2 t lashing options
* One-piece hydraulic grating ramps approx. 2,750 x 600 mm (collapsible to 20 mm)
* Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 l/min up to max. 140 l/min)
* Chassis, drawbar, bulkhead, mechanical drop supports, and access ramps hot-dip galvanized
* Axles, springs, air tanks, front support winch, and flange draw eye painted in black
* Side wall painting in RAL 9010 pure white
* Painting of the side panels in a RAL color of your choice available at an extra charge
* New vehicle with manufacturer's warranty
* Errors and intermediate sale excepted
* Immediately available ex Egestorf
Dsdpfx Adorwc R Rj Teul
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2001
Pateikti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
Mažas skelbimas
Egestorf
925 km
Priekaba su darbo platforma
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Mažas skelbimas
Egestorf
925 km
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida

































































