Žemagrindė platforma priekabaMÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL
14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
fiksuota kaina neįskaitant PVM
29 900 €
(35 581 € bruto)
Gamybos metai
2025
Sąlyga
Naujas
Vieta
Egestorf 

Rodyti vaizdus
Rodyti žemėlapį
Pagrindiniai duomenys
- Pavadinimas:
- Žemagrindė platforma priekaba
- Gamintojas:
- MÜLLER-MITTELTAL
- Gamybos metai:
- 2025
- Sąlyga:
- naujas
Kaina ir vieta
fiksuota kaina neįskaitant PVM
29 900 €
(35 581 € bruto)
- Pardavėjo vieta:
- Eichenstich 12, 21272 Egestorf, Vokietija

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 10 800 kg
- Bendras svoris:
- 14 400 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 6 270 mm
- Krovinių skyriaus plotis:
- 2 470 mm
Pasiūlymo informacija
- Sąrašo ID:
- A204-85-575
- Nuorodos Nr.:
- 62471
- Naujinta paskutinį kartą:
- Data 2025.11.08
Aprašymas
* ETÜ-TA-R 14.4:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 ton Gigant axles
* Parabolic springs with compensating unit
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* Tire pressure monitoring system with display option in the truck via EBS signal - no truck-side installation required
* Front landing gear
* Rear external foldable supports
* 15-pin power connector
* LED lighting system, 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
Dcsdpfsxvgriex Af Asp
* 50 mm softwood flooring
* Pre-installed facility in front of the bulkhead for retrofitting container locks
* Bolted 400 mm bulkhead made of flat steel sheet
* Bolted rear stanchions
* Drop sides with spring assist
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm, installation of 3 t recessed lashing rings every 600 mm possible, 1 x 6.3 t lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2 t lashing options
* One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Hydraulic flow divider in the trailer (for truck hydraulic pump output above 40 l/min up to max. 140 l/min)
* Chassis, drawbar, bulkhead, mechanical drop supports and ramps hot-dip galvanized
* Axles, springs, air tanks, front landing gear, and towing eye flange painted in black
* Side walls painted in RAL 2011 deep orange
* Painting of the side panels in any RAL shade available at extra cost
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available from Egestorf
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 ton Gigant axles
* Parabolic springs with compensating unit
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to a total length of 2,250 mm
* Tire pressure monitoring system with display option in the truck via EBS signal - no truck-side installation required
* Front landing gear
* Rear external foldable supports
* 15-pin power connector
* LED lighting system, 12 / 24 V
* EBS multi-voltage system for towing vehicles with 12 and 24 V electrics
* Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
Dcsdpfsxvgriex Af Asp
* 50 mm softwood flooring
* Pre-installed facility in front of the bulkhead for retrofitting container locks
* Bolted 400 mm bulkhead made of flat steel sheet
* Bolted rear stanchions
* Drop sides with spring assist
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm, installation of 3 t recessed lashing rings every 600 mm possible, 1 x 6.3 t lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2 t lashing options
* One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be compressed to 20 mm)
* Hydraulic flow divider in the trailer (for truck hydraulic pump output above 40 l/min up to max. 140 l/min)
* Chassis, drawbar, bulkhead, mechanical drop supports and ramps hot-dip galvanized
* Axles, springs, air tanks, front landing gear, and towing eye flange painted in black
* Side walls painted in RAL 2011 deep orange
* Painting of the side panels in any RAL shade available at extra cost
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available from Egestorf
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2001
Pateikti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
mažas skelbimas
Egestorf
925 km
Priekaba su darbo platforma
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
mažas skelbimas
Egestorf
924 km
Priekaba su darbo platforma
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
MÜLLER-MITTELTAL14,4 to, Tand - Plateau- Tieflader, hydr. Rampen
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida






























































