Kėbulas keičiamas priekaba

WECON 4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt

WhatsApp
WECON Curtainsider Sliding-Platform-BDF Swap body
Duke type WPR 715 SG
Year of construction
German first ownership!
4 pieces WPR 715 SG with the following equipment:
WECON standard sliding curtainsider swap body Duke type WPR 715 SG
External dimensions
Body length: 7,150 mm
Body width: 2,550 mm
Interior dimensions
Body length: 7,040 mm
Body width: 2,480 mm
Tare weight: 2,590 kg
Permissible total weight: 16,000 kg
Interior height 2,200 mm with sliding roof included
External height 2,450 mm (corner height 2,450 mm = C 00)
Side loading height: 2,120 mm
Rear through-loading height: 2,165 mm
Forklift pockets at the rear in the floor frame
Reinforced version of the zinc tubes for carrying a truck-mounted forklift.
Bracket required for securing chains on the body.
--> Limited centering tunnel due to reinforced design
Suitable for continuous use!
Floor frame: Made of galvanized quality steel, height 215 mm,
Container corner fittings 4-fold on 20' base, 4 gripping edges acc. to EN 284, wheel freewheel 120 mm
Floor covering for swap bodies: Multi-glued plywood floor approx. 25 mm thick, can be driven on with a forklift truck, suitable for an axle load of up to 5,460 kg
Rigid support legs, parking height 1320 mm, galvanized version
15 pairs of lashing rings. Distribution: From VK STW to the middle of the 1st pair of lashing rings approx. 400 mm, then even distribution of the remaining lashing rings
Lashing rings, 1 pair, mounted on the inclusive inside of the end wall stanchion Height 1000 mm from top edge of floor
Pallet stop edge 30 mm high on one side on the left in the direction of travel, normal tarpaulin side.
Lashing options through slotted holes (approx. 15 x 30 mm) Distance between slotted holes approx. 200 mm.
The loading height is reduced by 30 mm.
Ltjdju Uxr Repfx Ag Ioa
Front wall: smooth, bolted steel front wall, full height in cassette construction (galvanized cassettes)
Screen printing plate on the inside of the front wall 1500 mm high, 12 mm thick
Front wall inside with collision protection consisting of 300 mm high, galvanized sheet steel
Portal double wing door smooth, sandwich, 4 internal espagnolette locks, 4 hinges per door wing.
Left-hand side panel sliding tarpaulin in accordance with DIN EN 12641-2: quality 890 g/m², belt grid 500 x 600 mm, tear resistance: vertical 24 kN, horizontal 13 kN. VA belt buckle with pressure safety device.
1 central stanchion, symmetrically arranged --> left-hand direction of travel
Stanchions each with 3 rows of slat pockets included and one row of collection pockets (approx. 600 mm high) on the floor
8 aluminum insertable slats, driving direction left, approx. 100 mm high
Wecon RAPIDO RIGHT vertical steel profiles attached to the side tarpaulin and guided by rollers in the upper and lower running rails.
- Vertical tarpaulin tensioners are omitted
- Center stanchions are omitted
- Horizontal insertion slats are omitted
Fixed tarpaulin roof design as sliding roof Standard only fixed.
Canopy with side-by-side running rails, width between the running rails approx. 2,370 mm, distance from lower edge of running rail to lower edge of bows approx. 90 mm
Coating: Base frame and support legs hot-dip galvanized, superstructure parts dip primed and
powder-coated in a standard RAL color,
Roof tarpaulin: RAL 9010 (pure white)
Side tarpaulin: RAL 9010 (pure white)
Front wall: RAL 9010 (pure white)
Rear portal: RAL 9010 (pure white)
TÜV certificate Code XL included
The certificate confirms the load securing effect of the ve

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.