Platforma

Faymonville MAX Trailer 3-Achs-Mega-Tele-Plateau-Radmulden

Extendable platform:
Platform with hardwood planks with a rear slope of approx. 1,000 mm x 8°
1 pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm
2 pairs of lashing rings (LC 5,000 daN)
1 pair of lashing rings (LC 10,000 daN)
6 pairs of lashing rings that can be folded outwards (LC 5,000 daN)
2 pairs of lashing rings that can be folded outwards (LC 10,000 daN)
Cutouts in the outer frame of the platform for attaching tension straps (LC 2,000 daN)

Braking system:
Braking system in accordance with EU regulations with EBS-E (2S2M)

Paintwork:
First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer
High-quality 2-component (2K) topcoat, single-color in Novagrau
Rear section metallized and painted in RAL 9010 (pure white)
Metallic paint is not possible

Fifth wheel:
JOST fifth wheel (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load)

Steel construction:
Steel construction made of high-strength fine-grain steels
Steel grades:
S355J2+N/S355MC (yield strength 355 MPa)
S690QL/S700MC (yield strength 690 MPa)

Electrical system:
Electrical system in accordance with EU regulations, lighting 24 Volt
Sockets 24N, 24S & 15-pole

Axles and tires:
BPW axles, air-sprung, with disc brakes (377 mm), with raising/lowering function
The trailing lift axles with electro-magnetic reverse lock can be activated via reverse gear or manually
Axle tool
Tires 435/50 R 19.5

Included accessories:
Yellow-red air couplings on the galvanized connecting strip at the front
4 pieces of chocks with holder
2" kingpin
A galvanized steel front bulkhead approx. 1600 mm high. EN12642-XL
White reflector tape according to EU regulations on the side, on the extension and red at the rear
Platform with strong hardwood floor
9 pairs of socket pockets for plug-in profiles 100 x 50 mm in the outer frame of the platform
1 spare wheel holder under the platform on the right in the direction of travel
Galvanized folding supports under the slope of the platform
Adjustable mounting rails for ALU loading ramps at the rear of the vehicle
European reflector signs (red-yellow) at the rear of the semi-trailer
One mudflap at the rear of the semi-trailer
One bracket for a rotating beacon at the rear of the semi-trailer
On the gooseneck and on the rear plate, left and right, one bracket each for the warning signs including socket
One tool box HDPE 620x360x610 under the platform on the left in the direction of travel
4 pairs of WADER container pockets in the platform, for 1x 20ft container or 1 x 40ft container, an additional locking point is provided in the extension for a 45ft container
Nlodpfxek Eamme Agleg
3 pairs of socket pocket strips, mounted transversely in the platform, for plug-in profiles 100 x 50 mm
Lift axle on the front axle with control via TEBS E depending on the current axle load and the current loading condition
Speed stickers 80 km/h at the rear and on both sides
Four warning signs approx. 423 x 423 mm that can be extended by approx. 400 mm with an LED position light. The warning signs have a bracket for a rotating beacon
Load manometer for determining the axle loads including load diagram
HRM metallization (High Resistance Metallization) of the outer frame
Complete steel construction shot-blasted, then the defined visible surfaces are metallized

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.