Žemo profilio platforma

Faymonville 6-Achs-Tele-Semi mit PA-X Achssystem

Gooseneck:
-Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm, with a rear slope of approx. 850 mm x 10°
-Hydraulically extendable and retractable, stroke +- 250 mm incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles
-Open in the rear third
-For semi-trailer tractors: 6 x 4 and 8 x 4

Loading platform:
-Loading platform in extendable design, length approx. 11,000 mm with a slope at the rear of approx. 500 mm x 10°.
-A recess in the loading platform and into the slope to accommodate the excavator arm, approx. 4,240 x 900 x 440 mm
-Pneumatic locking with tapered locking pin and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adapt to the respective loading platform length

Ramps:
-A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm
-Hydraulically folding ramp tips.
-Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 215 mm
-Rubber flooring "Super Grip" 25 mm and sheet metal flooring approx. 5 mm as additional reinforcement on the slope of the loading platform
-Square climbing strips 20x30 mm, approx. every 200 mm on the outer frame of the ramp

Axles, suspension and tires:
-PA-X axle system, all axles hydro-mechanically forced steering
Bdjdpfx Adjk Af Svsreh
-The steering behavior of the two front axles can be optimally adjusted both mechanically and hydraulically to the loading platform length.
-Hose rupture valve on the axle compensation cylinders with automatic RESET function.
-Hydraulic cylinders with shut-off valves and quick-release couplings to secure in the raised position.
-245/70 R 17.5 3PMSF

Included accessories:
-Steel headboard, pluggable, approx. 400 mm high
-Connection strip for supply lines to the semi-trailer tractor, mounted at the height of the outer frame profile
-1 spare wheel
-Outer carrier of the gooseneck with mounting holes for screwable lashing rings
-The first hole approx. 200 mm from the front, then approx. every 400 mm
-2 pairs of screw-in lashing rings included
-Diamond plate flooring above the gooseneck
-On the gooseneck, 1 pair of pluggable aluminum sideboards, approx. 400 mm high, anodized
-On the gooseneck, a pluggable aluminum rear panel, approx. 400 mm high, anodized
-3.5" kingpin / 2" kingpin mounted
-Guide plate of the gooseneck for the turntable, approx. 500 mm wide
-4 wheel chocks
-4 axle load manometers
-Mechanical outrigger supports at the front
-1 INOX toolbox, one-piece, approx. 2,480 x 340 x 390 mm
-Mechanical outrigger supports at the front
-Continuous sheet metal flooring on the loading platform with a sand coating as an anti-slip measure
-1 intermediate table, approx. 500 mm wide, for the extension, with elongated holes for attaching and adjustable bridging elements
-Sand coating on the support surfaces of the intermediate table
-Mechanical locking to lock the intermediate table to the extension
-8 pairs of pocket rails in the outer frame
-Extensions (galvanized), extendable by approx. 230 mm on each side
-1 pair of hydraulic rear supports
-Central lubrication system
-1 reversing light on the left and right at the rear of the vehicle
-3 kW electric-hydraulic unit
-Extension planks, loose, in reinforced steel U-profile
-Wireless and cable remote control
-4 warning signs, approx. 423 x 423 mm

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.