Atvira puspriekabė su tentu

WEB-TRAILER 1-Achs-City-Sattelauflieger TRIDEC + LBW

PRSSQTri 09-SYS with body, single axle, tail lift
Dual tires 22.5 TRIDEC

---

Curtainsider Body, side height 2,600 mm from loading floor to lower edge of outer rail
Maximum steering angle 31°
Mechanical steering system with 1 drag link for steering one axle

Chassis width approx. 2,480 mm
Kingpin load max. approx. 12,000 kg
Landing gear position approx. 2,300 mm from kingpin
Chassis length approx. 11,105 mm
Axle loads: 10,000 kg
Ride height unladen approx. 1,300 mm at fifth wheel height 1,150 mm
Registration with COC documents

* Outer frame height approx. 125 mm, with groove for lashing eyes, base thickness approx. 4 mm, with external lashing holes
11 pairs of lashing eyes on the outer frame (tested lashing capacity 5 t per lashing point)
24 t telescopic landing gear

Axle
Axle manufacturer freely selectable by WEB Trailers (SAF/BPW/Jost)
Axle with large disc brake
Axle 10 t, disc 22.5", dual tires

Air suspension unit per 10 t
Lift and lowering device
Coupling heads red and yellow
Lift and lowering device mounted at the rear right in direction of travel
Air tanks 2 x approx. 80 l, steel, painted black
EBS brake system by Knorr or Wabco incl. RSS
Bjdpfjg Dkyqjx Afijwh
Tire pressure monitoring system
4 branded tires 275/70 R 22.5, branded steel wheels (brand as selected by WEB Trailer)

Tail Lift
Platform with roll-off protection
Platform steel - checker plate
Front plug connection for tail lift as Rema socket (without batteries! optional)
Tail lift as per our choice, 2.5 t capacity
Documentation, manual etc.
Operation via control unit in rear right box and remote control with spiral flex cable top right of body
Platform height approx. 2,000 mm (standard can be locked at rear)
Indicator lights on platform
Safety and polarity protection on positive and negative lines (red + blue)
Tail lift brand at WEB Trailer’s discretion

Body certificate according to DIN EN 12642 XL (with 27 t payload + tail lift) with min. 2 rows of wooden insert slats and locking at the top of platform

Contour marking on curtain and rear portal
ECE plates on tail lift
Rear marker lights (LED, red, top)
Sliding roof fixed at rear
Top flap for tail lift with gas strut
Front marker lights (white, top and bottom, with reflector, LED)
3 sets of side sliders from a manufacturer of your choice (via WEB)
Front wall standard steel with 400 mm steel cassettes
Internal wear plate approx./max. 2.40 m
3 rows of removable wooden slats

Lighting system 24 Volt LED with small multifunction lights
15-pin connector
Synchronized side marker lights

Roof tarpaulin reinforced 12x12 fabric
Ratchet tensioner at rear, release device only at front
2 steel buffer bumpers at the rear corners
Plastic mudguards, 180 degrees
Antispray mud flaps
Side underrun protection both sides, aluminium, steel profile, or plastic

Body certificate according to DIN EN 12642 XL

Coating/Paintwork:

Chassis painted in RAL 9005 or Novagrau 7350, other colours available at extra cost subject to powder colour stock
KTL coating with zinc phosphating plus powder, maximum corrosion protection
Hot-dip galvanising also optionally available
Bodywork colours in RAL of your choice

Approval:
COC

Ex works price

Note!!!
Images may show special equipment

Get expert advice and a free, non-binding quote.
Leasing, financing, or hire-purchase available!
We can accommodate your requirements! Contact us – we are happy to make you an offer.

Errors and interim sale excepted!

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.