Puspriekabė su judančiomis grindimis
STAS 13.50 "ECOhddisc93" 92,5m³

Fiksuota kaina plius PVM
22 680 €
(26 989 € bruto)
Būklė
Naudotas
Vieta
Korschenbroich-Glehn Vokietija
Puspriekabė su judančiomis grindimis STAS 13.50 "ECOhddisc93"   92,5m³
Puspriekabė su judančiomis grindimis STAS 13.50 "ECOhddisc93"   92,5m³
Puspriekabė su judančiomis grindimis STAS 13.50 "ECOhddisc93"   92,5m³
Puspriekabė su judančiomis grindimis STAS 13.50 "ECOhddisc93"   92,5m³
Puspriekabė su judančiomis grindimis STAS 13.50 "ECOhddisc93"   92,5m³
Puspriekabė su judančiomis grindimis STAS 13.50 "ECOhddisc93"   92,5m³
Puspriekabė su judančiomis grindimis STAS 13.50 "ECOhddisc93"   92,5m³
Puspriekabė su judančiomis grindimis STAS 13.50 "ECOhddisc93"   92,5m³
Puspriekabė su judančiomis grindimis STAS 13.50 "ECOhddisc93"   92,5m³
Puspriekabė su judančiomis grindimis STAS 13.50 "ECOhddisc93"   92,5m³
more Images
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50

Pagrindiniai duomenys

Kaina ir vieta

Fiksuota kaina plius PVM
22 680 €
(26 989 € bruto)
Pardavėjo vieta:
Dieselstr. 9, 41352 Korschenbroich-Glehn, Vokietija Vokietija
Skambinti

Techniniai duomenys

Matmenys ir svoris

Krovinio erdvės tūris:
93 m³
Krovimo vietos ilgis:
13 535 mm
Krovinių skyriaus plotis:
2 480 mm
Krovos erdvės aukštis:
2 825 mm

Ašys ir ratai

Ašių konfigūracija:
3 ašys

Daugiau informacijos

Pirmoji registracija:
12/2018

Pasiūlymo informacija

Skelbimo ID:
A233-44-004
Nuorodos numeris:
4430
Atnaujinimas:
paskutinį kartą atnaujinta 17.11.2026

aprašymas

Chassis: Reinforced, continuous chassis design, new.
Superstructure: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength, 140 mm high reinforced cross members (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure (trailer construction max. 39,000 kg).

Axles and Suspension: "Disc brake 22.5"
Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BVA) readable in the control unit (display), 1st axle can be lifted with starting aid (new EC regulation, without control unit option).

Tires and Wheels:
6 wheels with tires size 385/65 R 22.5, approx. 50-60% tread, on Alcoa DuraBright rims? 11.75x22.5 ET 120

Kingpin:
Hedpfx Ae Akp Rfemmonw
2" bolted into a 10 mm thick plate.

Landing Gears:
Mechanical landing gears with two speeds, 2x 20 tons support load with swivel foot.

Braking System:
According to EC standard, EBS E-system Wabco with RSS system (Roll Stability Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system.

Electrical System:
According to the guidelines of the EC standard 91/633 and 97/28 with 6 LED three-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels at the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile, 2 separate LED reversing lights on the side approx. at landing gear height.

Superstructure/Body: "Body fully welded inside", reinforced side walls.
Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn, aluminum body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system on 140 mm ALU cross members, floor load approx. 9 tons/m2, cross members mounted close together (approx. 350mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 rotary latch locks, mounted in the welded aluminum rear frame on Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, moving remainder unloading wall with Kevlar sheet approx. 1,800 mm long plus side Kevlar sheet sealing, aluminum wear plates on the side and rear approx. 2,000x1,500x4mm.

Hydraulic System: "Cargo - Floor" Sliding Floor System
Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lift slide bearings, type CF, 10 mm floor, ribbed design, hydraulics with approx. 200 mm working stroke, fixed points type "Faster" with high hydraulic locks mounted on the front wall, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electrical operation at the rear left with remote control integrated in a lockable, waterproof box, wear corners at the rear of the floor end.

Accessories:
6 PVC mudguards with

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Tiekėjas

Registruotas nuo: 2002

18 Skelbimai internetu

Skambinti

Siųsti užklausą

žemėus 
Vokietija
Austrija
Šveicarija
Jungtinės Amerikos Valstijos
Jungtinė Karalystė
Prancūzija
Belgija
Ispanija
Meksika
Italija
Nyderlandai
Lenkija
Rusijos Federacija
Baltarusija (Baltarusijos Respublika)
Ukraina
Estija
Turkija
Naujoji Zelandija
Airija
Čekijos Respublika
Danija
Suomija
Švedija
Norvegija
Liuksemburgas
Graikija
Lietuva
Latvija
Islandija
Portugalija
Brazilija
Venesuela
Argentina
Vengrija
Slovakija
Rumunija
Moldova
Slovėnija
Serbija
Juodkalnija
Albanija
Kroatija
Bulgarija
Šiaurės Makedonija
Bosnija ir Hercegovina
Izraelis
Egiptas
Marokas
Indija
Indonezija
Pietų Korėja
Japonija
Tailandas
Malaizija
Vietnamas
Kinija, Liaudies Respublika
Taivanas
Iranas
Bangladešas
Užklausos nepavyko išsiųsti. Prašome pabandyti vėliau.

Telefonas & Faksas

+49 2182 ... skelbimai