Kombinuotas indaplovė

Mercedes-Benz Arocs 2546 L 6x2 / Kroll Kombi GGVS/ADR

KROLL superstructure with water recovery:
Kdeds Aaz Scjpfx Ai Ssu
The mileage of the offered vehicles may vary, as some vehicles are currently being rented!
Further comparable vehicles are available upon request.

Weight variant 28 t, engine OM470, regulated water pump, engine brake, gearbox lock for auxiliary drive, disc brakes, Active Brake Assist 5, ABS, ASR, ESP, lane keeping assistant, attention assistant, Active Sideguard Assist, starting aid, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable, liftable and load-relieving 9 t trailing axle, axle load measuring device, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), tires: 1st and 3rd axles 385/65R22.5, 2nd axle 315/80R22.5
Total tank volume 14 m³; closure bottom over the entire cross-section of the tank, which can be opened upwards with 2 hydraulic cylinders; lid locking with clamping claws, hammer-head screws and linkage in galvanized design; centrally operated via a pneumatic cylinder; the unlocking can only be done under vacuum; level indicator: with 2 internal floats and an external scale; calibrated in 500 l steps for each piston position; discharge chute made of aluminum; emptying via pneumatically operated piston; piston with manhole DN 450 mm; tank division: locking of the pneumatic piston manually in 3 different positions; vacuum pump: VacuStar WR 2500 (2,500 m³/h at 400 mbar), water-cooled, mechanically driven via cardan shafts, lower and upper suction and discharge connections DN 100 with Perrot M coupling and blind cap, pneumatically operated; suction hose cassette with telescopic boom DN 125: the boom arm can be telescoped hydraulically up to 2,000 mm; the telescopic boom can be swiveled 180°, either together with the high-pressure hose reel or, after releasing a pneumatic lock, also independently of the high-pressure hose reel; the in- and out-movement of the suction hose is carried out hydraulically; incl. suction pipe approx. 800 mm long DN 125 mm and a Perrot M coupling; sludge water drain DN 80; high-pressure pump: URACA P 3-45 (approx. 348 l/min at 205 bar), drive mechanically via cardan shafts, pipelines/fittings: water filling via a Storz-C connection; water pressure can be adjusted continuously; large HD hose reel: hydraulically swiveling 180°; hydraulically driven; speed adjustment continuously adjustable; pressure line to the reel in DN 32 mm; sewer cleaning hose: DN 25 mm - 240 m long; small hose reel: hydraulically driven with 60 m HD hose DN 13 mm; spray gun for max. 200 bar operating pressure; low water warning system; residual water emptying pneumatically via the compressed air system of the chassis; water recovery system "Kroll Recycling System WRS 1", all working functions fully automatic combined operation of suction and high-pressure cleaning, variable water and sludge chamber, emptying by discharge piston, automatically operating water treatment, can be switched off, "Self-Cleaning-Control" automatic final cleaning of all components of the WRS system without operator intervention; rotating beacon mounted on the rear of the vehicle at the top; halogen work spotlights; removable and swiveling with 20 m cable; ambient lighting: 4 LED spotlights (one each on the right and left and on the boom); switchable from the control panel; control panel: mounted on the rear right of the superstructure and on the high-pressure hose reel; stainless steel with louver; illuminated; radio remote co

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.