Silo puspriekabė

KEMPF Schleusenkipper, Rüttler, ca. 58,7 cbm, Lift

In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale:
Ijdjzfdlfjpfx Adqeic

Kempf, approximately 58.7 cbm, tipping trailer with sliding roof
(Vehicle 859)

First registration: 06.11.2024
Permissible gross vehicle weight: 36,000 kg
Unladen weight: 7,340 kg
Payload: 28,660 kg
Overall length: 11,700 mm
Overall width: 2,550 mm
Overall height: 4,000 mm
Internal length: approximately 10,500 mm
Internal width: approximately 2,430 mm
Internal height: approximately 2,300 mm
Loading volume: approximately 58.7 cbm
Overall height to loading edge when loaded: approximately 3,810 mm
Interior lighting on the front wall
Front wall angled at 20 degrees, made of 5 mm thick aluminum, straight rear wall, side walls approximately 2.5 mm side wall profiles
Floor: 7 mm thick
Air vibrator located approximately 1/3 of the way from the front, on the left side, in the area of the lamp holders, operated via a switch
TÜV (technical inspection) valid until 11/2026, SP (safety inspection) valid until 05/2027
All components mounted on the frame are hot-dip galvanized
Roll-up tarpaulin, platform
Combination tail gate with swinging gate + portal doors, portal doors 1/3 and 2/3 with viewing window and rubber seal and grain slide cva. 400 x 400 mm
1 dust bag
Partition with 3 sliding partitions, swinging to the rear and lockable from below left, 6 locking positions for the partitions
Locking position approximately 1/5, 1/4, 3/4, 1/2 and 2/3 of the loading area
Sliding trough in the rear wall
3 aluminum tarpaulin poles
Hooks for drawbar/tarpaulin
High-performance Kempf 400 spur gear auger, throughput approximately 30-40 m3/h, 4 feed hoses for the auger approximately 5,000 mm long and 3" TW coupling, 4" cyclone
H2O tank approximately 30 L
2 x LED reversing lights
Folding underrun protection
2 x storage box, driver's side, center
1 pair of folding support legs
2 x wheel chocks
Load manometer
Storage compartments for hoses on the left and right above the axles, along the entire length
1. Lift
BPW turntable
Tire pressure monitoring system
Tires: 385/65R22.5 1.) approximately 80/70%, 2.) approximately 80/70%, 3.) approximately 70/50%
PVC half-shell mudguards
2 x LED work lights mounted on the folding support legs
Tipping cylinder: Penta 190-250 bar
Lightly used

Price: €80,000.00 (net)

All information without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of €10,000 is the Ludwigslust District Court; for dispute values exceeding this amount, the Schwerin Regional Court. Subject to errors, typos, and prior sale.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.