Keitimo kėbulo puspriekabė

KÖGEL 3-Achs-Containerchassis 20'

You can find our entire vehicle inventory, including immediately and soon available vehicles, on our website.

Excerpt from the equipment list. Complete equipment details available upon request.
Fpodpfx Ajy Rwx Sepfsg

Chassis:
* Chassis frame made of high-quality steel, but without an outer frame
* Coupling plate with a dual-kingpin according to DIN 74080 / ISO 337
* With cross member and container locks for accommodating: a) 1 x 20' container flush with rear, b) C715
* Vehicle equipped with Quick-Lock fastenings!

Running Gear:
* Lift axle mechanism on axle 1
* Fully automatic, load-dependent lift axle control. Start assist: activation by pressing the brake 3 times, 30% overload up to a speed of 25 km/h
* SAF three-axle assembly, with disc brakes approx. Ø 430 mm, offset approx. 120 mm. Air suspension with approx. 180 mm travel

Vehicle Tyres:
* Wheels with internal sensors according to UN ECE R141
* 6 tyres 385/65 R 22.5, AUSTONE ATH155
* 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120)

Chassis Attachments:
* JOST landing gear, mechanical with compensating foot, approx. 24 t lifting capacity. Single side operation to the right in the direction of travel
* Spray suppression system in accordance with Regulation (EU) No 109/2011, consisting of: 3 pairs of semi-circular mudguards with mud flaps
* 2 wheel chocks with holder
* Fixed rear underrun protection from steel according to ECE-R58, bolted design

Brake / Air Suspension System:
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic connector via ISO 7638 socket
* WABCO EBS system
* Air suspension system incl. 1 raise and lower valve, installed between 1st and 2nd axle in the direction of travel
* 2 fool-proof coupling heads at front ISO 1728
* Air tanks for brake system and air supply made of steel (EN 286-2)

Impact Protection:
* Solid steel rear bumper attached to the end cross member

Electrics / Electronics:
* Steel light carrier, arranged above the underrun protection
* KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED front marker lights and reflectors - flashing LED side marker lights - Superseal and bayonet connectors for the lights
* 2 multi-chamber LED tail lights with integrated LED outline markers on arm
* Spiral adapter connection cable (4m) from 15-pin socket to 2x7-pin plugs. Not ADR-compliant!
* 15-pin socket at front ISO 12098 (without connecting cables)
* 2 LED reversing lights (manufacturer as per our choice) mounted at rear. The operator must ensure sufficient electrical protection of the tractor unit (ISO 12098 Pin 8, ISO 3731 24V-S Pin 3)
* Complies with vehicle class EX/II, EX/III, FL, AT

Information Systems:
* Tyre pressure monitoring system according to UN ECE R141

Accessories:
* 1 fire extinguisher 6 kg with pressure gauge (European approval). Mounted including holder and protective cover on the left side of the landing leg in the direction of travel

Paintwork:
* The surface coating of assembly units (e.g. front frame extension, folding container locks, center supports) in Kögel black (KÖGEL KTL system, nano-ceramic and KTL coating)
* The frame receives, in addition to KTL coating, a full-surface paint in deep black RAL 9005

Documents:
* EX III version - ADR certificate

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.