Atvira puspriekabė su tentu

KÖGEL 3-Achs-Cargo-Coil-Pritschensattelanhänger

Extract Equipment List

Chassis I 10500.190
- Coil well approx. 9,000 mm (designed according to VDI Guideline 2700) for holding coils with a diameter from min. 900 mm to max. 2,100 mm.

Undercarriage I 17160.010
- Axle lift mechanism on axle 1 I 18330.271
- Three-axle SAF INTRADISC module with disc brakes, approx. 430 mm diameter, offset 120. Air suspension with approx. 180 mm lift

Vehicle Tyres I 20540.007
- 6 x 385/65 R 22.5, 160J tyres – brand at our discretion 20865.005
- 6 steel rims 22.5 x 11.75, inset approx. 120 mm (ET 120)

Brake / Air Suspension System
- 32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS socket connection ISO 7638 (without connecting lines), parking brake as spring-loaded brake, external pneumatic connectors, external EBS diagnostic connection via ISO 7638 socket.
- 32125.015 WABCO EBS system
- 33420.040 Air suspension system incl. one lift and lowering valve, installed left behind axle module. Driving level adjusts automatically.

Floor I 27380.144
- Fitted both sides: Pallet stop strips made of steel with VarioFix hole pattern (bolted), left and right in direction of travel, for inner width approx. 2,468 mm (loading height under outer beam reduced by approx. 20 mm)
- 40510.140 Floorboards approx. 30 mm thick, multi-layer bonded plywood, cut-out in coil well area. Coil well side walls clad with approx. 18 mm plywood.
- I 40513.020 Floor sealed all around
- I 40525.020 20 wooden coil well covers, with approx. 27 mm plate floor
- I 40542.011 Stake pockets for square tube insertable posts, approx. 80 x 80 mm, layout per drawing A2: 2 pairs on longitudinal member in 1st and 2nd position, 8 pairs in outer frame
- I 40551.108 8 pairs of stake pockets in the coil well for square tube insertable posts approx. 80x80 mm. Arrangement: 1st pair at front of well, 2nd-7th pairs as per standard drawing, 8th pair at rear.

Body
- 46538.010 Complies with body strength EN 12642 XL (VDI 2700). Certified for a payload of approx. 27,000 kg.

Front Wall 41510.125
- Front wall at superstructure height with volume corner posts of aluminium, aluminium hollow profiles riveted, bolted/riveted with frame, 1 pair of lashing rings to EN 12640.
- I 41570.050 Inside front wall reinforced with approx. 12 mm phenolic-coated plywood, approx. 1,250 mm high

Rear Wall
- 42400.563 Double-wing portal rear wall made of aluminium, approx. 2,630 mm clear width
- 42505.040 4 integrated locking rods (2 left, 2 right)
- I 42540.256 Bolted rear corner posts made of steel at portal height with additional impact protection extending to 1st door hinge
- I 42545.020 Corner posts on both sides can be mechanically swung out sideways by approx. 500 mm for loading/unloading. Operation requires sliding roof to be moved forward and rear doors to be opened.
- 42548.005 5 pairs of securing slots on rear corner posts

Side Wall
- 43500.300 3 pairs of KÖGEL sliding posts with mounts approx. 600 mm high for 5 inserted slats above floor level. Fixed to outer frame.
- I 43501.005 5 rows of slat mounts consisting of plug-in pockets on the sliding posts and variable supports in the corner posts.
- I 43525.016 Variable support as spacer for insertable slats (16 pcs) in the slat depot of sliding and corner posts (height approx. 100 mm above ...
Dcedexvgqljpfx Af Aep

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.