Darbinės platformos puspriekabėFAYMONVILLE
MAX Trailer MAX200 Telesattel Megatrailer
Darbinės platformos puspriekabė
FAYMONVILLE
MAX Trailer MAX200 Telesattel Megatrailer
fiksuota kaina neįskaitant PVM
49 750 €
(59 202 € bruto)
Sąlyga
Naudotas
Vieta
Essen 

Rodyti vaizdus
Rodyti žemėlapį
Pagrindiniai duomenys
Kaina ir vieta
fiksuota kaina neįskaitant PVM
49 750 €
(59 202 € bruto)
- Pardavėjo vieta:
- Heegstraße 6-8, 45356 Essen, Vokietija

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 38 390 kg
- Bendras svoris:
- 48 000 kg
- Ašių konfigūracija:
- 3 ašys
- Pirmoji registracija:
- 03/2024
- Kita apžiūra (TÜV):
- 03/2026
- Bendras plotis:
- 2 540 mm
- Įranga:
- ABS
Pasiūlymo informacija
- Sąrašo ID:
- A204-21-315
- Nuorodos Nr.:
- 33271
- Naujinta paskutinį kartą:
- Data 2025.10.31
Aprašymas
You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the equipment list. Full specification available on request.
Hedpfx Asxth Adofaew
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Excerpt from the equipment list. Full specification available on request.
Hedpfx Asxth Adofaew
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2003
Pateikti užklausą
Telefonas & Faksas
+49 201 8... skelbimai
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida
















