Darbinės platformos puspriekabėSCHWARZMÜLLER
J-Serie Plateau Plattform Auflieger Liftachse
Darbinės platformos puspriekabė
SCHWARZMÜLLER
J-Serie Plateau Plattform Auflieger Liftachse
Fiksuota kaina plius PVM
2 900 €
(3 451 € bruto)
Gamybos metai
2014
Būklė
Naudotas
Vieta
Plankenfels 

Pagrindiniai duomenys
- Pavadinimas:
- Darbinės platformos puspriekabė
- Gamintojas:
- SCHWARZMÜLLER
- Gamybos metai:
- 2014
- Būklė:
- naudotas
Kaina ir vieta
Fiksuota kaina plius PVM
2 900 €
(3 451 € bruto)
- Pardavėjo vieta:
- Scherleithen 5, 95515 Plankenfels, Vokietija

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 30 250 kg
- Bendras svoris:
- 36 000 kg
- Ašių konfigūracija:
- 3 ašys
- Pirmoji registracija:
- 06/2014
- Kita apžiūra (TÜV):
- 06/2025
- Krovimo vietos ilgis:
- 13 620 mm
- Krovinių skyriaus plotis:
- 2 480 mm
- Bendras plotis:
- 2 550 mm
- Įranga:
- ABS
Pasiūlymo informacija
- Skelbimo ID:
- A193-21-286
- Nuorodos numeris:
- 06-Schwarzmueller-646/PCP
- Atnaujinimas:
- paskutinį kartą atnaujinta 05.07.2026
aprašymas
Schwarzmüller Platform Flatbed Trailer Lift Axle
Permissible total weight: 36,000 kg,
Unladen weight: 5,750 kg,
Payload: 30,250 kg,
SAF axles,
Lift axle 1st axle,
Air suspension,
Disc brakes,
Underride protection right, left, and rear,
2x storage compartment right,
1x storage compartment left,
Rubber rear impact buffer,
2x extensible wide load signs at the front,
2x extensible wide load signs at the rear,
2x crank supports operable from right side,
EBS,
ABS,
Perforated external frame with hole spacing approx. 100 mm,
Wheelbase: approx. 6,350 + 1,310 + 1,310 mm,
External dimensions LxW: approx. 13,840 x 2,550 mm,
Loading area LxW: approx. 13,620 x 2,480 mm,
Front wall height: approx. 2,400 mm,
Loading height: approx. 1,250 mm,
Tires: 385/65R22.5,
Tread depth tires left front: 4 mm,
Tread depth tires left middle: 16 mm,
Tread depth tires left rear: 8 mm,
Tread depth tires right front: 5 mm,
Tread depth tires right middle: 15 mm,
Tread depth tires right rear: 10 mm,
Further equipment:
Reinforced steel frame welded construction for point load 20 t over 4 m at frame center of gravity for ASH unladen 1,090 - 1,190 mm with air-suspended tractor, replaceable 2" kingpin (EU installation size, corner dimension 2,040 mm),
Perforated external frame with hole spacing approx. 100 mm, oval hole 40/25 mm according to DIN EN 12640
Air suspension with lift and lower function (approx. +120/-80 mm),
Automatic setting of driving level from 15 km/h,
SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, ø 430 mm, 3 x 9 t rigid, wheelbase 2 x 1,310 mm,
Front axle automatically liftable = 2-sided lift (1 x 96307) lifts and lowers automatically depending on weight (when lift axle is raised, the loading or total height increases by approx. 50 mm) and additionally with forced lowering incl. integrated start-up aid limited by speed for button operation in the cab (without button installation),
1 odometer = hubodometer (ECO-Meter) (KIT No. 10801, with hubcap KIT No. 52917) (on 2nd axle front right),
Mech. 2 x 12 t support winches, single-sided operation and push compensation,
Two-line brake,
EBS-E - electronic brake system (Wabco 2S2M = one axle = 2nd axle monitored),
RSS - stability program,
Spring-loaded parking brake on 2 axles,
Codpfx Answqyrhjveha
Aluminum air tank, unpainted,
Plywood floor 27 mm, flush with outer frame,
2 steel hat profile rails above the longitudinal beams plus additional 12 mm plywood floor, beveled to the outer frame,
Fixed aluminum hollow profile front wall 2,400 mm with 2 center supports,
Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.
Permissible total weight: 36,000 kg,
Unladen weight: 5,750 kg,
Payload: 30,250 kg,
SAF axles,
Lift axle 1st axle,
Air suspension,
Disc brakes,
Underride protection right, left, and rear,
2x storage compartment right,
1x storage compartment left,
Rubber rear impact buffer,
2x extensible wide load signs at the front,
2x extensible wide load signs at the rear,
2x crank supports operable from right side,
EBS,
ABS,
Perforated external frame with hole spacing approx. 100 mm,
Wheelbase: approx. 6,350 + 1,310 + 1,310 mm,
External dimensions LxW: approx. 13,840 x 2,550 mm,
Loading area LxW: approx. 13,620 x 2,480 mm,
Front wall height: approx. 2,400 mm,
Loading height: approx. 1,250 mm,
Tires: 385/65R22.5,
Tread depth tires left front: 4 mm,
Tread depth tires left middle: 16 mm,
Tread depth tires left rear: 8 mm,
Tread depth tires right front: 5 mm,
Tread depth tires right middle: 15 mm,
Tread depth tires right rear: 10 mm,
Further equipment:
Reinforced steel frame welded construction for point load 20 t over 4 m at frame center of gravity for ASH unladen 1,090 - 1,190 mm with air-suspended tractor, replaceable 2" kingpin (EU installation size, corner dimension 2,040 mm),
Perforated external frame with hole spacing approx. 100 mm, oval hole 40/25 mm according to DIN EN 12640
Air suspension with lift and lower function (approx. +120/-80 mm),
Automatic setting of driving level from 15 km/h,
SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, ø 430 mm, 3 x 9 t rigid, wheelbase 2 x 1,310 mm,
Front axle automatically liftable = 2-sided lift (1 x 96307) lifts and lowers automatically depending on weight (when lift axle is raised, the loading or total height increases by approx. 50 mm) and additionally with forced lowering incl. integrated start-up aid limited by speed for button operation in the cab (without button installation),
1 odometer = hubodometer (ECO-Meter) (KIT No. 10801, with hubcap KIT No. 52917) (on 2nd axle front right),
Mech. 2 x 12 t support winches, single-sided operation and push compensation,
Two-line brake,
EBS-E - electronic brake system (Wabco 2S2M = one axle = 2nd axle monitored),
RSS - stability program,
Spring-loaded parking brake on 2 axles,
Codpfx Answqyrhjveha
Aluminum air tank, unpainted,
Plywood floor 27 mm, flush with outer frame,
2 steel hat profile rails above the longitudinal beams plus additional 12 mm plywood floor, beveled to the outer frame,
Fixed aluminum hollow profile front wall 2,400 mm with 2 center supports,
Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruotas nuo: 2002
182 Skelbimai internetu
Siųsti užklausą
Telefonas & Faksas
+49 9204 ... skelbimai
Šie skelbimai taip pat gali jus sudominti.
Mažas skelbimas
Raalte
1 194 km
Platformos priekaba
FaymonvilleSPNZ-5
FaymonvilleSPNZ-5
Mažas skelbimas
Parma
1 499 km
Atvira žemagrindė platforminė puspriekabė
Zorzisemirimorchio pianale ribassato aperto
Zorzisemirimorchio pianale ribassato aperto
Mažas skelbimas
Legden
1 230 km
Darbinės platformos puspriekabė
RENDERSNS4X31 Plattform-/Plateau Auflieger, Lenkachse
RENDERSNS4X31 Plattform-/Plateau Auflieger, Lenkachse
Mažas skelbimas
Dabrowa k/Opola
645 km
Platformos priekaba
ScaniaR500 XT 6x4 PLATFORMA Z HDS PK53002
ScaniaR500 XT 6x4 PLATFORMA Z HDS PK53002
Mažas skelbimas
Plankenfels
1 031 km
Darbinės platformos puspriekabė
Foedisch 13.6 Plattform Liftachse
Foedisch 13.6 Plattform Liftachse
Mažas skelbimas
Twist
1 127 km
Darbinės platformos puspriekabė
WEB-TRAILERHARTHOLZBODEN-PLATEAU 3-ACHS
WEB-TRAILERHARTHOLZBODEN-PLATEAU 3-ACHS
Mažas skelbimas
Lahr
1 337 km
Darbinės platformos puspriekabė
FLIEGLSDS 350 Platto Liftachse SAF-Achsen
FLIEGLSDS 350 Platto Liftachse SAF-Achsen
Mažas skelbimas
Osterburg
837 km
Darbinės platformos puspriekabė
Wilken Oldenburg S 24-2-2
Wilken Oldenburg S 24-2-2
Mažas skelbimas
Bovenden
1 006 km
Atvira priekaba su tentu
SchwarzmüllerAZ 18
SchwarzmüllerAZ 18
Mažas skelbimas
Vuren
1 297 km
Krovimo platforma
ATMPLATEAU steering axle
ATMPLATEAU steering axle
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida


































































































































































