Trijų pusių savivartis priekabaMÜLLER-MITTELTAL
11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Trijų pusių savivartis priekaba
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. verzinkt mit Anlegerampen
fiksuota kaina neįskaitant PVM
26 500 €
(31 535 € bruto)
Gamybos metai
2024
Sąlyga
Naujas
Vieta
Egestorf 

Rodyti vaizdus
Rodyti žemėlapį
Pagrindiniai duomenys
- Pavadinimas:
- Trijų pusių savivartis priekaba
- Gamintojas:
- MÜLLER-MITTELTAL
- Gamybos metai:
- 2024
- Sąlyga:
- naujas
Kaina ir vieta
fiksuota kaina neįskaitant PVM
26 500 €
(31 535 € bruto)
- Pardavėjo vieta:
- Eichenstich 12, 21272 Egestorf, Vokietija

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 8 780 kg
- Bendras svoris:
- 11 900 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 5 000 mm
- Krovinių skyriaus plotis:
- 2 420 mm
- Krovos erdvės aukštis:
- 500 mm
Pasiūlymo informacija
- Sąrašo ID:
- A128-69-375
- Nuorodos Nr.:
- 6013
- Naujinta paskutinį kartą:
- Data 2026.01.07
Aprašymas
* KA-TA-R 11.9 Masterline:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem compensating unit
----Drawbar / Flange Eye:
* Height-adjustable (up to 300 mm), hot-dip galvanized drawbar with 40 mm flange eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Side-mounted toolbox made of galvanized sheet steel, on the right
* Plastic quarter mudguards
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* Bolted underrun protection with LED tail lights
----Tipper Body:
* Mesh hooks on the sides and rear, integrated into the central locking mounts plus 3 external hooks on the front wall
* Hot-dip galvanized chassis
* Steel pal. three-way tipper body, fully galvanized
* Continuous side walls, without central stanchion, foldable, with drop side spring supports
* Tailboard can be folded down and used as a swinging gate, with manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed, foldable lashing ring in each corner, plus 4 x 3 t recessed and foldable lashing rings integrated in the outer frame on each side
* 4 mm steel floor, with slot rail at the rear for loading ramps
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the bed, integrated into the chassis, accessible from the rear
----Tyres:
* Tyres 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle is hot-dip galvanized
----Information:
* Body reinforced, load securing certificate according to EN 12642 XL
* New vehicle with manufacturer warranty
Bsdpfx Ahjpk D D Ue Uecu
* Subject to prior sale and errors
----Delivery time:
* Immediately available ex Egestorf on the A7
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem compensating unit
----Drawbar / Flange Eye:
* Height-adjustable (up to 300 mm), hot-dip galvanized drawbar with 40 mm flange eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Side-mounted toolbox made of galvanized sheet steel, on the right
* Plastic quarter mudguards
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin power connector
* Bolted underrun protection with LED tail lights
----Tipper Body:
* Mesh hooks on the sides and rear, integrated into the central locking mounts plus 3 external hooks on the front wall
* Hot-dip galvanized chassis
* Steel pal. three-way tipper body, fully galvanized
* Continuous side walls, without central stanchion, foldable, with drop side spring supports
* Tailboard can be folded down and used as a swinging gate, with manual central locking
* Hot-dip galvanized, bolted rear stanchion
----Load Securing:
* 1 x 5 t recessed, foldable lashing ring in each corner, plus 4 x 3 t recessed and foldable lashing rings integrated in the outer frame on each side
* 4 mm steel floor, with slot rail at the rear for loading ramps
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the bed, integrated into the chassis, accessible from the rear
----Tyres:
* Tyres 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle is hot-dip galvanized
----Information:
* Body reinforced, load securing certificate according to EN 12642 XL
* New vehicle with manufacturer warranty
Bsdpfx Ahjpk D D Ue Uecu
* Subject to prior sale and errors
----Delivery time:
* Immediately available ex Egestorf on the A7
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2001
Pateikti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida























































