Žemagrindė platforma priekabaMÜLLER-MITTELTAL
11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Fiksuota kaina plius PVM
26 250 €
(31 238 € bruto)
Gamybos metai
2024
Būklė
Naujas
Vieta
Egestorf 

Pagrindiniai duomenys
- Pavadinimas:
- Žemagrindė platforma priekaba
- Gamintojas:
- MÜLLER-MITTELTAL
- Gamybos metai:
- 2024
- Būklė:
- naujas
Kaina ir vieta
Fiksuota kaina plius PVM
26 250 €
(31 238 € bruto)
- Pardavėjo vieta:
- Eichenstich 12, 21272 Egestorf, Vokietija

Skambinti
Techniniai duomenys
Matmenys ir svoris
Bendras svoris:
11 900 kg
Didžiausias leistinas svoris:
8 780 kg
Krovimo vietos ilgis:
5 000 mm
Krovinių skyriaus plotis:
2 420 mm
Krovos erdvės aukštis:
500 mm
Ašys ir ratai
Ašių konfigūracija:
2 ašys
Pasiūlymo informacija
- Skelbimo ID:
- A128-69-354
- Nuorodos numeris:
- 60131
- Atnaujinimas:
- paskutinį kartą atnaujinta 29.09.2026
aprašymas
* KA-TA-R 11.9 Masterline:
Tedopk D Dmspfx Adrec
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 tons BPW axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Flange Coupling:
* Height-adjustable, hot-dip galvanized drawbar by 300 mm with a 40 mm flange coupling
----General Components:
* Jost mechanical front support leg
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Tool box made of galvanized sheet steel on the right side
* Plastic quarter fenders
----Electrical System / Lighting:
* TPMS tire pressure monitoring system
* 15-pole electrical connector
* Bolted under-ride guard with LED rear lights
----Tipping Bridge:
* Net hooks on the side and rear in the bearings of the central locking system, as well as 3 pieces on the outside of the front wall
* Hot-dip galvanized chassis
* Steel pallet 3-sided tipping body, fully galvanized
* Continuous side walls without a center beam, foldable with side board spring supports
* Foldable and pivoting tailgate via manual central locking
* Hot-dip galvanized, bolted rear beam
----Load Securing:
* 1 x 5-ton recessed and foldable lashing point in each corner, and 4 x 3-ton lashing points on each side, embedded in the outer frame and foldable
* 4 mm steel sheet floor, mounting rail at the rear for loading ramps
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 tons / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment at the rear, located under the loading area and embedded in the chassis
----Tires:
* Tires 235/75 R 17.5
----Painting:
* Axles, springs, air tanks, drawbar, and support legs painted in a black tone
* Vehicle is hot-dip galvanized
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale subject to change
----Delivery Time:
* Available from approximately week 47/2026
Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.
Tedopk D Dmspfx Adrec
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 tons BPW axles
----Suspension:
* Parabolic springs with tandem equalizing unit
----Drawbar / Flange Coupling:
* Height-adjustable, hot-dip galvanized drawbar by 300 mm with a 40 mm flange coupling
----General Components:
* Jost mechanical front support leg
* 2 mechanical, hot-dip galvanized folding support legs at the rear
* Tool box made of galvanized sheet steel on the right side
* Plastic quarter fenders
----Electrical System / Lighting:
* TPMS tire pressure monitoring system
* 15-pole electrical connector
* Bolted under-ride guard with LED rear lights
----Tipping Bridge:
* Net hooks on the side and rear in the bearings of the central locking system, as well as 3 pieces on the outside of the front wall
* Hot-dip galvanized chassis
* Steel pallet 3-sided tipping body, fully galvanized
* Continuous side walls without a center beam, foldable with side board spring supports
* Foldable and pivoting tailgate via manual central locking
* Hot-dip galvanized, bolted rear beam
----Load Securing:
* 1 x 5-ton recessed and foldable lashing point in each corner, and 4 x 3-ton lashing points on each side, embedded in the outer frame and foldable
* 4 mm steel sheet floor, mounting rail at the rear for loading ramps
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 tons / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment at the rear, located under the loading area and embedded in the chassis
----Tires:
* Tires 235/75 R 17.5
----Painting:
* Axles, springs, air tanks, drawbar, and support legs painted in a black tone
* Vehicle is hot-dip galvanized
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale subject to change
----Delivery Time:
* Available from approximately week 47/2026
Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruotas nuo: 2001
172 Skelbimai internetu
Siųsti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
Sėkmingas
Jūsų žinutė buvo išsiųsta.
Mažas skelbimas
Egestorf
925 km
Trijų pusių savivartis priekaba
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida























































