Žemagrindė puspriekabė

MÜLLER-MITTELTAL 3- achs Satteltiefl.-Luft-Lenk-hydr. Auffahrram.

* TS 3 Profile 30.0:
* Wabco EBS-E (electronic brake system)
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring cylinders
* Drum brakes
* 3 x 11 t BPW Eco Plus axles
* Air suspension with lift and lower function as well as RtR valve
* Last axle self-steering with electro-pneumatic steering lock
* Smartboard control box as information tool mounted on the trailer with pressure sensors for total axle load display
* Side underrun protection
* Support winches at the front and mechanical swing-down supports at the rear of the chassis
* 15-pin electrical connector
* LED lighting system 12 / 24V
* Removable LED rotating beacon, rear left
* Mechanically adjustable warning sign packages front and rear
* Straight steel sheet mudguards
* Spare wheel holder underneath chassis, right side
* Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm with folding lid
* On the sides of the fifth wheel platform: 400 mm fold-down/removable aluminum side walls (RAL 9010 pure white)
* Rear wall inserted, 150 mm high
* Rear slope on fifth wheel platform to lowbed, approx. 700 mm long
* Fifth wheel platform with 50 mm wooden planks and lowbed with 60 mm wooden planks
* Chequer plate over the axles
* 8 x mechanical fold-out extensions to a total width of 3 m, but not on the rear slope (extension planks available and stored on the fifth wheel platform)
* Lashing package: on the fifth wheel platform, 2 x 6.3 t lashing points each, on the side 3 x 5 t lashing bars in the outer frame, on the lowbed sides 2 x 13.4 t lashing rings each, plus 4 x 10 t lashing rings, pivoting and retractable/flush-mounted in the outer frame; each side 2 x 6.4 t lashing eyes and 1 lashing point at the rear in the excavator arm recess
* Excavator arm recess from the end of the last fixed axle over the steering axle to the rear end plate, continuous with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm
* 2 x container locks directly after the gooseneck on the lowbed
* Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways)
* 4-way control block for future customer installation of hydraulic ramp shifting
* The outer plank on the ramp is made of 50 mm hardwood
* Hydraulic distributor in the trailer (for hydraulic pump performance in the truck from over 40 ltr. up to 120 ltr./min.)
* Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm
* Lowbed loading area: approx. 8,500 x 2,520 mm
* Unladen loading height approx. 910 mm (including 860 mm approach slope)
* Fifth wheel height approx. 1,220 mm (suitable for 2- and 3-axle tractors)
* Chassis, ramps, rear supports, and extension consoles hot-dip galvanized
* Axles, support winches, and air tanks painted in black
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from CW 16/2026
Nledpjl Tnvgofx Aghsh

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.