Atvira priekabaMÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
Atvira priekaba
MÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
fiksuota kaina neįskaitant PVM
29 900 €
(35 581 € bruto)
Gamybos metai
2025
Sąlyga
Naujas
Vieta
Egestorf 

Rodyti vaizdus
Rodyti žemėlapį
Pagrindiniai duomenys
Kaina ir vieta
fiksuota kaina neįskaitant PVM
29 900 €
(35 581 € bruto)
- Pardavėjo vieta:
- Eichenstich 12, 21272 Egestorf, Vokietija

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 10 500 kg
- Bendras svoris:
- 14 400 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 7 000 mm
- Krovinių skyriaus plotis:
- 2 470 mm
- Krovos erdvės aukštis:
- 400 mm
Pasiūlymo informacija
- Sąrašo ID:
- A104-27-108
- Nuorodos Nr.:
- 6285a
- Naujinta paskutinį kartą:
- Data 2025.07.08
Aprašymas
* EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Front landing gear
* Rear folding support legs, externally mounted
Kfsdpol Th Dfofx Ag Ija
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks
* Bolted bulkhead made of smooth sheet metal
* Side walls made of trapezoid-profiled steel sheet, foldable, center-divided (1x)
* Rear wall made of steel, insertable between the ramps, storage bracket for non-use inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing shackles possible every 600 mm – 4 lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes for 1.2 t lashing options in the bulkhead and end crossmember
* One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding support legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange eye, and landing gear painted black
* Side wall color freely selectable up to approx. 2 weeks before production date; no metallic or special colors allowed
* --reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Front landing gear
* Rear folding support legs, externally mounted
Kfsdpol Th Dfofx Ag Ija
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks
* Bolted bulkhead made of smooth sheet metal
* Side walls made of trapezoid-profiled steel sheet, foldable, center-divided (1x)
* Rear wall made of steel, insertable between the ramps, storage bracket for non-use inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing shackles possible every 600 mm – 4 lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes for 1.2 t lashing options in the bulkhead and end crossmember
* One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding support legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange eye, and landing gear painted black
* Side wall color freely selectable up to approx. 2 weeks before production date; no metallic or special colors allowed
* --reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2001
Pateikti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida

















































