Žemagrindė platforma priekabaMÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
fiksuota kaina neįskaitant PVM
31 900 €
(37 961 € bruto)
Gamybos metai
2025
Sąlyga
Naujas
Vieta
Egestorf 

Rodyti vaizdus
Rodyti žemėlapį
Pagrindiniai duomenys
- Pavadinimas:
- Žemagrindė platforma priekaba
- Gamintojas:
- MÜLLER-MITTELTAL
- Gamybos metai:
- 2025
- Sąlyga:
- naujas
Kaina ir vieta
fiksuota kaina neįskaitant PVM
31 900 €
(37 961 € bruto)
- Pardavėjo vieta:
- Eichenstich 12, 21272 Egestorf, Vokietija

Skambinti
Techniniai duomenys
- Bendras svoris:
- 14 400 kg
- Didžiausias leistinas svoris:
- 10 500 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 7 000 mm
- Krovinių skyriaus plotis:
- 2 470 mm
- Krovos erdvės aukštis:
- 400 mm
Pasiūlymo informacija
- Sąrašo ID:
- A104-26-931
- Nuorodos Nr.:
- 6285
- Naujinta paskutinį kartą:
- Data 2025.07.10
Aprašymas
* EBS (electronic braking system)
* Emergency release device for spring-loaded cylinders
Nsdpfx Ajl Thvxsghsdc
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Landing gear at the front
* Rear fold-out supports, externally mounted
* Plastic toolbox approx. 858 x 500 x 500 mm, located front right on the outside of the front wall
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provision for retrofitting 20'' container locks in front of the front wall and at the rear
* Bolted smooth sheet metal front wall
* Side walls made of trapezoidal-profiled steel sheet, folding, split in the middle
* Steel rear wall, sliding, can be stored in front of the front wall when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t retractable lashing brackets possible every 600 mm – four lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front crossmember and rear end member for 1.2 t lashing options
* One-piece mechanical grid ramps with spring system for single-operator use, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and landing gear painted in black
* Color of side walls freely selectable up to approx. 2 weeks before production date (excluding metallic and special colors)
* --reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
* Emergency release device for spring-loaded cylinders
Nsdpfx Ajl Thvxsghsdc
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lifting and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Landing gear at the front
* Rear fold-out supports, externally mounted
* Plastic toolbox approx. 858 x 500 x 500 mm, located front right on the outside of the front wall
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provision for retrofitting 20'' container locks in front of the front wall and at the rear
* Bolted smooth sheet metal front wall
* Side walls made of trapezoidal-profiled steel sheet, folding, split in the middle
* Steel rear wall, sliding, can be stored in front of the front wall when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm
* Installation of 3 t retractable lashing brackets possible every 600 mm – four lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front crossmember and rear end member for 1.2 t lashing options
* One-piece mechanical grid ramps with spring system for single-operator use, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, flange towing eye, and landing gear painted in black
* Color of side walls freely selectable up to approx. 2 weeks before production date (excluding metallic and special colors)
* --reinforced and certified body according to EN 12642 XL, including load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2001
Pateikti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida

















































