Žemo profilio platforma

MAX Trailer 5-Achs-Tele-Semi mit hydr. Rampen-nlla.

Gooseneck:
Gooseneck with rear bevel of approx. 750 mm x 10°
3 pairs of lashing rings
Hardwood decking 30 mm thick

Loading platform:
Loading area in extendable design with rear bevel of approx. 500 mm x 8°
8 pairs of lashing rings can be folded outwards
1 pair of lashing rings lying in the front of the cargo bed
Cut-outs in the outer frame of the cargo bed for attaching lashing straps
Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles

Two-part steel ramps:
A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg.

Seat posts:
- JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load).

Axles and tires:
BPW axles and suspension, 4th + 5th axle self-steering
Technical axle load: 12,000 kg
4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation
Tires 235/75 R 17.5 3PMSF

Brake system:
Brake system in accordance with EU regulations with EBS-E (4S3M)

Sockets and lighting:
Electrical system in accordance with EU regulations, 24 volt lighting
ASPÖCK-NORDIK (ASS3)
ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets
Connection according to ISO
24N ISO-1185
24S ISO-3731
15 pole ISO-12098

Paint finish:
First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer
A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey
Rear section metallized and painted in RAL 9010 (pure white)
No metallic paint finish possible

Steel construction:
Steel construction made from high-strength fine-grained steels
Steel grades:
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)

Accessories:
One spare wheel with holder in front of the bulkhead
2" kingpin
One galvanized steel bulkhead approx. 400 mm high
Yellow-red air couplings on the galvanized connection strip at the front
2 restraining shoes with holder on the bulkhead
Mounting in the rear area of the gooseneck for ALU docking lights
A bracket for a rotating beacon at the rear of the trailer
Galvanized supports under the bevel of the loading area
White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear
Electro-hydraulic unit at the rear under the cargo bed
A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively
Control valves for the ramps mounted on the right-hand side of the trailer
A mud flap at the rear of the trailer
Manual and description on USB stick
3.5" kingpin supplied loose
ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH)
The rear galvanized stanchions are removable
Iijdpfx Ajl Sl Izjhrsh
(length of the body approx. 2,560 mm)
3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container
6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed
Galvanized extensions, extendable by approx. 230 mm per side
Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status
Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope
On the chequer plates, above the kingpin and the load floor

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.