Kiti

Other TF 35.31 F

Suitable for vacuuming and transporting non-flammable liquids and sludge, and for vacuuming and transporting fecal matter from pits.

It should be noted that when filling the container, the density of the material being vacuumed must always be taken into account, and compliance with the permissible axle loads for the vehicle (= permissible gross weight) must always be ensured. We assume no liability for overloading the vehicle.

Tandem trailer description:
• Wheels located next to the loading area
• Gross vehicle weight 3500 kg (without accessories)
• Frame dimensions (L x W, approx. 3025 x 1540 mm)
• Overall trailer width approx. 2000 mm
• Tandem axle, overrun brake with reverse drive automatic and parking brake
• Bowden cables in maintenance-free design
• Plastic (black) fenders mounted (inner sides not lined)
• Sturdy frame construction as a box-profile frame with a flat support surface
• V-shaped drawbar (completely hot-dip galvanized)
• Ball hitch (hitch height approx. 440 mm - fixed, not height-adjustable)
• 1 heavy-duty support wheel (approx. 500 kg load capacity, foldable)
• 12-volt lighting, reversing light in the right rear light
• 13-pole plug (plastic)
• Wheels with 4-ply tires 185 R14C 8PR, 5-hole rim
• 2 wheel chocks with holders

TANK:
Cylindrical, single-shell, shell wall thickness 4 mm, made of S 235 JR
Outer bottom and closing bottom with manhole in a dished end shape
Stiffening rings or vacuum rings on the tank
Electrically welded (MAG).

Technical data

Usable volume: approx. 2.3 m3
Sludge chamber volume: approx. 2.5 m, air volume
Permissible tank pressure: -0.8 / +0.5 bar
Permissible operating pressure: -0.8 / +0.5 bar
Test overpressure internally: 0.65 bar
Vacuum: designed for 100%

Manhole DN 450 (folding closure)
Foldable as a cleaning opening, at the back at the lowest point in the dished end, permanently welded with clamping screws.

Tank content indicator for sludge chamber:
The fill level is read through a covered, large sight glass DN 80, mounted at the front right behind the cab.
With cleaning connection Storz B-coupling at the top and bottom, a manual slide valve at the bottom in the line for shutting off.
Protective plate made of aluminum in front of the pipe with a scale. Scale graduations every 500 liters marked as a line on the mounted protective plate.

Discharge:
The sludge chamber is discharged through a free outlet or by expelling the sludge by applying pressure to the vacuum pump from the towing vehicle.

SUCTION-PRESSURE INSTALLATION:

Piping and fittings:
Psdpfx Ajiv U Hpjpvspu
are dimensioned in DN 80 and routed in a stress-free manner through hose sleeves.

The following are provided for overfill protection:
A suction dome at the top of the tank with a PVC ball as an overfill preventer.
Also available:
Component-tested safety valve

Lower suction and discharge connection:
Welded to the lowest point of the manhole with an external shut-off device, a quick-closing slide valve DN 80 operated by hand and a Perrot V-coupling with a blind cover DN 80,
Vent ball valve 1/2" approx. 60° upwards between the slide valve DN 80 and the Perrot coupling.

Overfill connection:
Perrot V-part DN 80, mounted on the front bottom flap.

Trailer suction connection:
Perrot V-part DN 80, mounted at the front at the lowest point on the front bottom flap.

7. BODY EQUIPMENT

Discharge flap: below the dished end at the end of the tank, screwable, material: aluminum
Hose boxes: open, on the right and left of the body with rails, as wide and as

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.