Žemagrindė priekaba

Humbaur 4-Achs-Tieflader HTD 40K- mit Radmulden

HTD 40K-RM-BM_

Internal dimensions: approx. 9,220 mm x 2,540 mm
Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm
Perm. total weight: 24,000 kg
Payload: approx. 14,000 kg
Tyres: 235/75R17.5 inches
Loading height: approx. 900 mm
Drawbar length: approx. 1,500 mm
Coupling height: approx. 820–1,000 mm
Ramp angle: approx. 10°
Ramp length: approx. 3,150 mm
Ramp width: approx. 750 mm
Perm. total weight special equipment: 40,000 kg
Payload special equipment: approx. 30,000 kg
Low-bed length: approx. 6,610 mm
Overall dimensions (LxWxH): 11,200
Technical total weight: approx. 44,000 kg
Technical axle load: approx. 11,000 kg

6 pairs of lashing points, 3,000 kg each
Lashing points in the low-bed outer frame
4 pairs of lashing points, 3,000 kg each
Lashing/pocket sleeves 3 t in the high-bed outer frame
1 pair of lashing points, 3,000 kg each
Lashing/pocket sleeves 3 t in the low-bed outer frame

Suspension:
Air suspension unit including lifting and lowering acting on the rear axle unit

Brake system:
Brake system according to EC directives with EBS 4S/3M in multivoltage version (12–24V), spring-loaded parking brake including two external test ports for brake/modulator and bellows pressure

Electrics:
LED lighting with indicator function for side marker lights, multivoltage (12–24V)

Turntable:
Heavy-duty welded construction with low-maintenance ball-bearing turntable

Towing equipment:
Cranked drawbar with 50 mm towing eye, low-maintenance silent bushings including height adjustment for drawbar

Chassis:
Heavy-duty welded construction made of high-tensile fine-grained steel, through-running cross-members for maximum stability
Nwodsiciutspfx Aaajc
Wheel recesses front (approx. 2,500 mm upper length, 410 mm depth) and rear (approx. 1,470 mm upper length, 370 mm depth); without wheel recess covers
Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm)
Wheel cutouts above the rear wheels with 2,010 mm wheelbase, front corners chamfered, rear with climbing strips on ramp incline for maximum safety during loading and unloading
4 pairs of stake pockets (90x50 mm) on high-bed outer frame
1 pair of stake pockets (90x50 mm) on low-bed outer frame

Floor:
50 mm softwood flooring (painted/impregnated)

Ramps:
One-piece hot-dip galvanized loading ramps (3,150 mm x 750 mm) with 50 mm softwood covering (painted/impregnated), laterally adjustable, direct-acting upright spring-assist for easiest handling

Finish:
Chassis frame hot-dip galvanized in immersion bath

Support:
2 foldable supports at the rear left and right of the vehicle

Equipment:
Folding side underrun protection
Front semi-circular plastic mudguards; rear straight steel mudguards with anti-spray
2 wheel chocks with holders; contour markings according to ECE regulation R48

Front wheel recess cover:
With 3 pairs of stake pockets, without covering (cover retractable under the longitudinal beams) 975.00888
Hardwood covering for front wheel recess cover

Rear wheel recess cover:
With 1 pair of stake pockets, without covering (cover retractable under the longitudinal beams) 975.00897
Hardwood covering for rear wheel recess cover

3 pairs of bolted lashing eyes, 6 t
3 m equipment package without incline B=11,200
Folding outriggers with softwood boards 970.04199-36
LED warning package HTD, cranked Aspöck warning boards 4 times, electrics and revolving beacon
1 pair of storage compartments for 3 m wood planks package (2 pieces mounted lengthwise under the loading area in front of the wheel recess)
Rubber coat

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.