Žemagrindė platforma priekabaMÜLLER-MITTELTAL
ETÜTAR 14,4 Tieflader, LED, Runduml.
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL
ETÜTAR 14,4 Tieflader, LED, Runduml.
Fiksuota kaina plius PVM
26 500 €
(31 535 € bruto)
Gamybos metai
2026
Būklė
Naujas
Vieta
Alsdorf 

Pagrindiniai duomenys
- Pavadinimas:
- Žemagrindė platforma priekaba
- Gamintojas:
- MÜLLER-MITTELTAL
- Gamybos metai:
- 2026
- Būklė:
- naujas
Kaina ir vieta
Fiksuota kaina plius PVM
26 500 €
(31 535 € bruto)
- Pardavėjo vieta:
- Carl - Zeiss - Straße 26, 52477 Alsdorf, Vokietija

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 10 950 kg
- Bendras svoris:
- 14 400 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 6 270 mm
- Krovinių skyriaus plotis:
- 2 470 mm
- Įranga:
- ABS, galinis keltuvas
Pasiūlymo informacija
- Skelbimo ID:
- A220-57-293
- Nuorodos numeris:
- 31941
- Atnaujinimas:
- paskutinį kartą atnaujinta 04.06.2026
aprašymas
Müller-Mitteltal ETÜ-TA-R 14.4 Tandem – Low-loader – Platform – Trailer
Available from the 37th week of 2026, inquiry number: 31941. Delivery to your address is possible.
* We would be happy to provide you with an individual offer.
* ----
* GVWR: 14.4t, Payload: 10.95t
* LED lighting system
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
Dcjdpszbfmqofx An Ujh
* Tire pressure monitoring system (TPMS)
* 6.27m x 2.47m platform with galvanized front wall 400mm
* Excavator bucket rest made of hardwood, screwed onto the front wall
* Unladen floor height 930mm / Laden floor height 870mm
* One-piece ramps with hot-dip galvanized grating, slip-resistant design, can be pushed together to approx. 20 mm, secured by retaining rods and inclined support.
* Ramp lifter with vertically mounted, adjustable springs for easy one-person operation.
* 4 UVV lashing eyes (LC 6300daN)
* Perforated outer frame (45° bent with hole pattern for lashing straps, lashing force per lashing point LC 2000 daN at a distance of min. 480 mm. Installation of UVV lashing eyes LC 3000 daN at a distance of approx. 600 mm is possible) with close transverse profiling, high-flanged front and rear end and rear access ramp, hot-dip galvanized.
* 10 UVV lashing eyes LC 3000 daN, can be recessed into the existing hole pattern in the outer frame, in addition
* Further lashing possibilities through holes (Ø 50 mm, LC 1200 daN) in the front and end beams
* Tool box in front of the front wall
* Side marker lights with turn signal control
* Softwood floor, 50 mm thick. Chassis hot-dip galvanized
* Height-adjustable support jacks at the front, folding supports at the rear.
* 2 container locking devices recessed in the front beam
* Drawbar with 40mm drawbar eye (hot-dip galvanized), height adjustable, a 50mm eye is also possible on request
* 1 removable LED marker light at the rear ----
* Leasing, hire purchase, financing, and trade-in are possible.
* e.g. 525 Euros with a 60-month term, no down payment, no residual value.
* ----
* Our opening hours:
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside of opening hours, we are available by appointment.
We speak German, we speak English, mowimy po polsku, on parle français
Leasing, financing, and trade-in are possible.
Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.
Available from the 37th week of 2026, inquiry number: 31941. Delivery to your address is possible.
* We would be happy to provide you with an individual offer.
* ----
* GVWR: 14.4t, Payload: 10.95t
* LED lighting system
* GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs
Dcjdpszbfmqofx An Ujh
* Tire pressure monitoring system (TPMS)
* 6.27m x 2.47m platform with galvanized front wall 400mm
* Excavator bucket rest made of hardwood, screwed onto the front wall
* Unladen floor height 930mm / Laden floor height 870mm
* One-piece ramps with hot-dip galvanized grating, slip-resistant design, can be pushed together to approx. 20 mm, secured by retaining rods and inclined support.
* Ramp lifter with vertically mounted, adjustable springs for easy one-person operation.
* 4 UVV lashing eyes (LC 6300daN)
* Perforated outer frame (45° bent with hole pattern for lashing straps, lashing force per lashing point LC 2000 daN at a distance of min. 480 mm. Installation of UVV lashing eyes LC 3000 daN at a distance of approx. 600 mm is possible) with close transverse profiling, high-flanged front and rear end and rear access ramp, hot-dip galvanized.
* 10 UVV lashing eyes LC 3000 daN, can be recessed into the existing hole pattern in the outer frame, in addition
* Further lashing possibilities through holes (Ø 50 mm, LC 1200 daN) in the front and end beams
* Tool box in front of the front wall
* Side marker lights with turn signal control
* Softwood floor, 50 mm thick. Chassis hot-dip galvanized
* Height-adjustable support jacks at the front, folding supports at the rear.
* 2 container locking devices recessed in the front beam
* Drawbar with 40mm drawbar eye (hot-dip galvanized), height adjustable, a 50mm eye is also possible on request
* 1 removable LED marker light at the rear ----
* Leasing, hire purchase, financing, and trade-in are possible.
* e.g. 525 Euros with a 60-month term, no down payment, no residual value.
* ----
* Our opening hours:
* Monday - Thursday: 08:00 - 17:00
* Friday: 08:00 - 15:00
Outside of opening hours, we are available by appointment.
We speak German, we speak English, mowimy po polsku, on parle français
Leasing, financing, and trade-in are possible.
Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruotas nuo: 2001
27 Skelbimai internetu
Siųsti užklausą
Telefonas & Faksas
+49 2404 ... skelbimai
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida




























