Mainomas kėbulo sunkvežimis

VOLVO FH500 6x2 Wechselsystem mit F545RA.2.27 L214

Chassis – New Vehicle: – MODEL 2024

• Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided.
• A detailed vehicle specification can be found in the attached documents.
• Oil pump type: LEDUC
• Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe
• Front support cover with company logo (laser-cut/smooth steel sheet)

Bodywork: Crane Exchange System:
The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable.

• Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front
• Drop-side flatbed design as steel welded construction, removable
• Length approx. 380 cm, width approx. 248 cm
• Platform body painted. RAL chassis color
• Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp
• Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color
• 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning
• 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure)
• Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on
• Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted)
• Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear
• Holders (for support plates, crane pads) made of galvanized steel
• Additional supports installed under the chassis
• Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections
• Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers

• New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions
• For a detailed crane specification, please refer to the attached documents
• Series 5450
• Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes
Hedpfxjy Hm E Hj Am Esl

Additional Equipment and Crane Accessories:
• 5 crane support plates with holders, arranged as per manufacturing drawings
• AWC (automatic cable length control)
• Operating manual, maintenance manual, and crane inspection booklet
Lighting:
• 2 x LED AS integrated into the front wall
• 2 x rotating beacons on the FH roof
• 2 x strobe lights in the hood
• 2 x LEDs under the body at the rear, left and right, arrangement as agreed
• 4 x LED AS, two on each side under the body near the support legs
• 4 yellow LED light strips, one on each support leg

Further information available upon request.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.