Priekaba su darbo platforma

ES-GE Tandemanhänger - Bordwände, CV

Equipment Overview Chassis: Steel welded construction with welded longitudinal beams and punched Z-crossmembers, close crossmember spacing for high floor load capacity. Ramp storage: Two insertion pockets between the longitudinal beams behind the axle assembly under the loading platform, each for one loading ramp, with a locking plate in the rear head frame. Underrun protection: According to EC regulations. Front landing gear: Landing gear with single-sided operation. Rear supports: Two adjustable drop-down supports. Axles: 2 x 10 t air-suspension axle units, SAF make, drum brakes approx. 300 x 200 mm, hub-centric for twin tires, ABS, total air suspension lift approx. 200 mm (approx. 140 mm lift / 60 mm lowering), operated via hand lever with locking positions. Tyres: 8-piece, 235/75R 17.5 - manufacturer of our choice, on steel rims 6.75 x 17.5, ET mounted. Spray protection: PVC mudguards in front of and behind the axles according to EC standard. Load securing: Approx. every 150 mm on the outer frame a hole for lashing straps, tensile strength approx. 2.5 t (lashing straps can be hooked in when side walls are closed, outer frame bevelled). 6 pairs of foldable lashing rings evenly distributed, tensile strength approx. 8 t. Stanchion pockets for plug-in stanchions 80/50: 3 pairs of stanchion pockets in the outer frame, evenly distributed. Brake system: Air brake system according to EC with EBS. Two spirals as connection to the towing vehicle with red/yellow coupling heads. Spring parking brake acting on one axle. Floor: Approx. 28 mm Z-hardwood floor recessed into the outer frame. Front wall: 25 mm board wall, removable. Lighting system: Lighting according to EC, 24 volt, multi-chamber rear lights, number plate lights, side marker lights and lane departure lamps at the rear, connection plate left on the drawbar incl. connection cable with 15-pin and 2 x 7-pin plugs. Accessories: - 2 wheel chocks with holders - Detachable flashing beacon at the rear - Delivery of an additional 40 mm towing device (GG max. 13,500 kg) Paintwork: Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to latest technical standards. Body components cleaned, primed and hot-dip galvanized. Chassis: hot-dip galvanized + RAL 3002 carmine red Side walls: RAL 3002 carmine red Kinnegrip stanchions: RAL 3002 carmine red Hubs: KTL black Underrun protection: RAL 9010 pure white Rims: RAL 9006 silver Attachments: galvanized / KTL black Rear extension approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm. Length-adjustable rigid drawbar, 6 x approx. 100 mm, with bolted towing eye approx. 50 mm according to DIN 74053. 4 rows of stanchion pockets across the loading area, evenly distributed. 12 plug-in stanchions made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long. Container locks for 1x20' container. Container locks 1 x 20' extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452. 1 pair of aluminium loading ramps, load capacity per pair approx. 9,000 kg. 4 stainless steel tool boxes between and behind the axles. 6 x 25 mm side walls and rear wall made of anodized aluminum hollow profiles, approx. 600 mm high, fold-down and removable, removable Kinnegrip stanchions (interior width approx. 2,480 mm), including side wall storage magazine at the front wall.
Gujdpfxey Auhbj Abgja

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.