Kitas

Franzoi TAZ280 Bauschutt Schredder

Franzoi TAZ280 Crawler-mounted Universal Shredder

2-shaft shredder specifically designed for construction waste
Operating weight approx. 16.5 tons
Radio remote controlled

This machine is primarily intended for processing mixed construction debris. It can also efficiently process construction or dry waste wood. The two counter-rotating shafts shred the material with a force of approx. 210,000 N/m!

Hourly throughput is highly dependent on the material and the desired final grain size, typically ranging from 80 to 200 tons. This machine is often used as a pre-shredder to prepare tough materials for further processing.

Overband magnet – variable discharge direction
Discharge conveyor hydraulically height-adjustable up to approx. 3.10 m discharge height, corresponding to approx. 30 m³ of material under the belt.
Hydraulic tilting hopper with approx. 2.5 m³ loading capacity, controllable via the remote control.
Quick-change system for fast replacement of the shredder shafts.
(The service life of the shafts is strongly material-dependent and ranges from 200 to 600 hours. The shafts can be hard-faced multiple times and continued to be used before final replacement.)

Large control panel displaying comprehensive machine information and a variety of digital configuration options. Manual panel with push buttons for activating individual functions.
GPS already installed. This allows the manufacturer to remotely view, monitor, and adjust all machine parameters and pressures if necessary. This reduces downtimes to an absolute minimum.

Hydraulically adjustable screen deck for setting grain size in 4 steps (approximate values depending on material):
1. 0-60 mm
2. 0-70 mm
3. 0-90 mm
4. 0-125 mm

Shaft operating speed adjustable:
1. both fast
2. both slow
3. one fast – one slow

Gearbox
• Hand-built by the factory with approx. 210,000 Nm!

Engine: Cummins B 6.7 Stage 5 with AdBlue
• Power: approx. 280 HP at 2000 rpm
• Diesel consumption highly depends on application, approx. 18-25 liters per hour
Hsdpfex T Um Sox Ah Isfb

Hydraulics: Only high-quality components, predominantly Linde

Machine dimensions in working position: Length 9.60 m (in transport position 7.60 m)
• Width: 2.30 m
• Height: 2.90 m

Shredder shafts approx. 70 cm diameter, made from high-grade Hardox 500/600.
Filling volume above shredder shafts approx. varies; shaft service life approx. 300–500 operating hours, depending on application. Should then be replaced or reconditioned by "armoring welding".

Note: We only offer this machine in central, northern, and parts of eastern Germany. For southern Germany from the midpoint, Koelsch Baumaschinen is responsible!

Compelling advantages and differences compared to competitors:
• Engine power approx. 100 HP higher and Stage 5 compliant
• Gearbox offers 50,000 Nm more
• In combination, results in significantly higher production output
• Standard GPS monitoring and fault analysis
• Shaft cleaning program standard
• Screens adjustable and openable hydraulically
• Engine and cooler located advantageously at the rear of the machine, not above where dust accumulates
• Tilting hopper remote controlled
• Intake capacity above the shafts larger than others
• Genuine 2.5 m³ hopper
• Hydraulically height-adjustable discharge conveyor
• Engine and all technology accessible without ladders or tools
• Realistic operating weight ensures durability and stability – a completely different machine for tough jobs

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.