Žemagrindė platforma priekabaMÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
fiksuota kaina neįskaitant PVM
27 950 €
(33 260 € bruto)
Gamybos metai
2025
Sąlyga
Naujas
Vieta
Egestorf 

Rodyti vaizdus
Rodyti žemėlapį
Pagrindiniai duomenys
- Pavadinimas:
- Žemagrindė platforma priekaba
- Gamintojas:
- MÜLLER-MITTELTAL
- Gamybos metai:
- 2025
- Sąlyga:
- naujas
Kaina ir vieta
fiksuota kaina neįskaitant PVM
27 950 €
(33 260 € bruto)
- Pardavėjo vieta:
- Eichenstich 12, 21272 Egestorf, Vokietija

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 10 900 kg
- Bendras svoris:
- 14 400 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 6 270 mm
- Krovinių skyriaus plotis:
- 2 470 mm
- Krovos erdvės aukštis:
- 400 mm
Pasiūlymo informacija
- Sąrašo ID:
- A152-54-665
- Nuorodos Nr.:
- 5911 a
- Naujinta paskutinį kartą:
- Data 2025.09.30
Aprašymas
* ETÜ-TA-R 14.4:
* RDÜ (Tire Pressure Monitoring System)
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
* LED lighting
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with equalizing unit
* Height-adjustable drawbar, adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Jost landing gear at the front
* Externally mounted hot-dip galvanized folding supports at the rear
* Plastic toolbox mounted on the front right exterior of the bulkhead
* Side underrun protection
* Plastic quarter fenders
* Hot-dip galvanized chassis and drawbar
* Front wall
* Rear wall
* Tailgate and loading ramps
Fgsdpfxervvflj Af Aji
* 50 mm softwood floor
* Provision for retrofitting container locks in front of the bulkhead
* Bolted smooth sheet steel front wall
* Side walls made from trapezoidal-profiled steel, foldable with drop-side spring assist
* Insertable steel rear wall between the ramps; holder for stowage in front of the bulkhead when not in use
* Bolted rear stanchions
* Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm; possible installation of 3 t drop lashing rings every 600 mm; in each corner, front and rear, 1 x 6.3 t lashing ring; various holes in the front and end cross members for 1.2 t lashing options
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear entry ramp approx. 860 mm
* --Reinforced and certified body according to EN 12642 XL including load securing certificate--
* Drop side color in RAL 9010 pure white
* Painting of side walls in any RAL color available at extra cost
* New vehicle with manufacturer’s warranty
* Errors and intermediate sale subject to change
* Immediately available from Egestorf
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
* RDÜ (Tire Pressure Monitoring System)
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
* LED lighting
* Drum brakes
* 2 x 7 t Gigant axles
* Parabolic springs with equalizing unit
* Height-adjustable drawbar, adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Jost landing gear at the front
* Externally mounted hot-dip galvanized folding supports at the rear
* Plastic toolbox mounted on the front right exterior of the bulkhead
* Side underrun protection
* Plastic quarter fenders
* Hot-dip galvanized chassis and drawbar
* Front wall
* Rear wall
* Tailgate and loading ramps
Fgsdpfxervvflj Af Aji
* 50 mm softwood floor
* Provision for retrofitting container locks in front of the bulkhead
* Bolted smooth sheet steel front wall
* Side walls made from trapezoidal-profiled steel, foldable with drop-side spring assist
* Insertable steel rear wall between the ramps; holder for stowage in front of the bulkhead when not in use
* Bolted rear stanchions
* Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm; possible installation of 3 t drop lashing rings every 600 mm; in each corner, front and rear, 1 x 6.3 t lashing ring; various holes in the front and end cross members for 1.2 t lashing options
* One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear entry ramp approx. 860 mm
* --Reinforced and certified body according to EN 12642 XL including load securing certificate--
* Drop side color in RAL 9010 pure white
* Painting of side walls in any RAL color available at extra cost
* New vehicle with manufacturer’s warranty
* Errors and intermediate sale subject to change
* Immediately available from Egestorf
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2001
Pateikti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
mažas skelbimas
Egestorf
925 km
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
mažas skelbimas
Egestorf
925 km
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
mažas skelbimas
Egestorf
925 km
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
mažas skelbimas
Egestorf
924 km
Priekaba su darbo platforma
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida
























































































































