Priekaba su darbo platformaMÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Priekaba su darbo platforma
MÜLLER-MITTELTAL
14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Fiksuota kaina plius PVM
29 900 €
(35 581 € bruto)
Gamybos metai
2025
Būklė
Naujas
Vieta
Egestorf 

Rodyti nuotraukas
Rodyti žemėlapį
Pagrindiniai duomenys
Kaina ir vieta
Fiksuota kaina plius PVM
29 900 €
(35 581 € bruto)
- Vieta:
- Eichenstich 12, 21272 Egestorf, Deutschland

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 10 900 kg
- Bendras svoris:
- 14 400 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 6 270 mm
- Krovinių skyriaus plotis:
- 2 470 mm
- Krovos erdvės aukštis:
- 400 mm
Pasiūlymo informacija
- Skelbimo ID:
- A144-06-196
- Nuorodos numeris:
- 61581
- Atnaujinimas:
- paskutinį kartą atnaujinta 19.02.2026
aprašymas
ETÜ-TA-R 14.4
----Braking system:
* EBS electronic braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Tow bar / Flange eye:
* Tow bar height-adjustable by 300 mm
* Tow bar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* RDÜ (tyre pressure monitoring system)
* LED tail lights 12 / 24 V
* 15-pin power connector
----General attachments:
* Jost landing gear front
* Externally mounted, hot-dip galvanized folding supports at rear
Nodpfx Acjq Dyvyjyekw
* Plastic toolbox, front right, mounted on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Fittings in front of bulkhead for retrofitting container locks
* Bolted flat sheet steel bulkhead
* Drop sides made of trapezoidal-profiled steel sheet, folding with drop side lifting springs
* Rear steel wall retractable between ramp holders, stowable in front of bulkhead when not in use
* Bolted rear stanchions
* Rear drive-on slope approx. 860 mm
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various drillings for 1.2 t lashing points in front bulkhead and rear end crossmember
----Ramps:
* One-piece, mechanical mesh ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as tow bar, bulkhead, tailgate, and access ramps
* Sideboard colour in RAL 9010 pure white
* Painting of side walls in alternative RAL colours available at extra cost
----Info:
* --Reinforced and certified body built according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex Egestorf
Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.
----Braking system:
* EBS electronic braking system
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Air suspension
----Tow bar / Flange eye:
* Tow bar height-adjustable by 300 mm
* Tow bar extension by 250 mm to 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* RDÜ (tyre pressure monitoring system)
* LED tail lights 12 / 24 V
* 15-pin power connector
----General attachments:
* Jost landing gear front
* Externally mounted, hot-dip galvanized folding supports at rear
Nodpfx Acjq Dyvyjyekw
* Plastic toolbox, front right, mounted on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low loader platform:
* 50 mm softwood floor
* Fittings in front of bulkhead for retrofitting container locks
* Bolted flat sheet steel bulkhead
* Drop sides made of trapezoidal-profiled steel sheet, folding with drop side lifting springs
* Rear steel wall retractable between ramp holders, stowable in front of bulkhead when not in use
* Bolted rear stanchions
* Rear drive-on slope approx. 860 mm
----Load securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various drillings for 1.2 t lashing points in front bulkhead and rear end crossmember
----Ramps:
* One-piece, mechanical mesh ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
----Paintwork:
* Hot-dip galvanized chassis as well as tow bar, bulkhead, tailgate, and access ramps
* Sideboard colour in RAL 9010 pure white
* Painting of side walls in alternative RAL colours available at extra cost
----Info:
* --Reinforced and certified body built according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex Egestorf
Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruotas nuo: 2001
180 Skelbimai internetu
Siųsti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
Mažas skelbimas
Egestorf
925 km
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tieflader, luftgefed. mit Auffahrrampen
Mažas skelbimas
Nürnberg
1 075 km
Savivartis 3 pusių
HumbaurHTK 185024 UNIVERSAL DREISEITENKIPPER
HumbaurHTK 185024 UNIVERSAL DREISEITENKIPPER
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida





































































