Žemagrindė platforma priekabaMÜLLER-MITTELTAL
14,4 to. Tiefl. , luftgefedert - Einschubrampen
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL
14,4 to. Tiefl. , luftgefedert - Einschubrampen
fiksuota kaina neįskaitant PVM
32 950 €
(39 210 € bruto)
Gamybos metai
2025
Sąlyga
Naujas
Vieta
Egestorf 

Rodyti vaizdus
Rodyti žemėlapį
Pagrindiniai duomenys
- Pavadinimas:
- Žemagrindė platforma priekaba
- Gamintojas:
- MÜLLER-MITTELTAL
- Gamybos metai:
- 2025
- Sąlyga:
- naujas
Kaina ir vieta
fiksuota kaina neįskaitant PVM
32 950 €
(39 210 € bruto)
- Pardavėjo vieta:
- Eichenstich 12, 21272 Egestorf, Vokietija

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 10 360 kg
- Bendras svoris:
- 14 400 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 6 270 mm
- Krovinių skyriaus plotis:
- 2 470 mm
- Krovos erdvės aukštis:
- 400 mm
Pasiūlymo informacija
- Sąrašo ID:
- A116-45-309
- Nuorodos Nr.:
- 6159
- Naujinta paskutinį kartą:
- Data 2026.02.05
Aprašymas
* ETÜ-TA-ER 14.4:
----Brakes:
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Air suspension with lifting and lowering function
----Drawbar / Flange Towing Eye:
* Drawbar height adjustable by 300 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required
* LED lighting system
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized, folding rear supports
* Plastic toolbox mounted on the front right exterior of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Pre-installed fittings for later mounting of 20" container locks front and rear
* Bolted smooth sheet steel front wall
* Trapezoidal profile steel sheet side walls, foldable with drop side spring assist
* Bolted, hot-dip galvanized rear stanchions
Cpedpfsndpn Sox Afieu
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
* 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis
----Painting:
* Hot-dip galvanized chassis, drawbar, front wall and rear wall
* Complete vehicle hot-dip galvanized
----Info:
* New vehicle with manufacturer's warranty
* Subject to alteration and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
----Brakes:
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Air suspension with lifting and lowering function
----Drawbar / Flange Towing Eye:
* Drawbar height adjustable by 300 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required
* LED lighting system
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized, folding rear supports
* Plastic toolbox mounted on the front right exterior of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Pre-installed fittings for later mounting of 20" container locks front and rear
* Bolted smooth sheet steel front wall
* Trapezoidal profile steel sheet side walls, foldable with drop side spring assist
* Bolted, hot-dip galvanized rear stanchions
Cpedpfsndpn Sox Afieu
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
* 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis
----Painting:
* Hot-dip galvanized chassis, drawbar, front wall and rear wall
* Complete vehicle hot-dip galvanized
----Info:
* New vehicle with manufacturer's warranty
* Subject to alteration and prior sale
----Delivery Time:
* Available immediately ex Egestorf
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2001
Pateikti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida









































































