Žemagrindė platforma priekabaMÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
fiksuota kaina neįskaitant PVM
35 900 €
(42 721 € bruto)
Gamybos metai
2025
Sąlyga
Naujas
Vieta
Egestorf 

Rodyti vaizdus
Rodyti žemėlapį
Pagrindiniai duomenys
- Pavadinimas:
- Žemagrindė platforma priekaba
- Gamintojas:
- MÜLLER-MITTELTAL
- Gamybos metai:
- 2025
- Sąlyga:
- naujas
Kaina ir vieta
fiksuota kaina neįskaitant PVM
35 900 €
(42 721 € bruto)
- Pardavėjo vieta:
- Eichenstich 12, 21272 Egestorf, Vokietija

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 14 400 kg
- Bendras svoris:
- 19 000 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 6 270 mm
- Krovinių skyriaus plotis:
- 2 470 mm
- Krovos erdvės aukštis:
- 400 mm
Pasiūlymo informacija
- Sąrašo ID:
- A107-45-933
- Nuorodos Nr.:
- 6160
- Naujinta paskutinį kartą:
- Data 2025.07.10
Aprašymas
* ETÜ-TA-ER 19.0:
* WabcoEBS-E (electronic braking system)
* RDÜ tire monitoring system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar with 50 mm flange eyelet and height adjustment of 110 mm via offset plate
* Jost landing gear at the front
* Outward folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power plug
* Multi-chamber tail lights
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor in clamped version
* Preparation in front of the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Split steel side walls - trapezoidal profile - foldable with center folding stanchion
* Steel rear wall can be slid in between the ramps - holder for non-use inside in front of the front wall
* Rear stakes bolted
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t quick-lash rings possible every 600 mm
* Lasi package: in the corners at the front and rear each 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the front and end carrier for 1.2 t lashing options
* One-piece slide-in ramps approx. 2,750 x 620 mm
* Approach angle at rear approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports and drive-on ramps hot-dip galvanized
* --- Axles, air tanks, flange eyelet and landing gear painted in a shade of black ---
Iodpomi Tcqefx Ag Istr
* Loading height unladen approx. 940 mm
* Loading height laden approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and interim sale excepted
* Immediately available from Egestorf
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
* WabcoEBS-E (electronic braking system)
* RDÜ tire monitoring system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar with 50 mm flange eyelet and height adjustment of 110 mm via offset plate
* Jost landing gear at the front
* Outward folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm on the right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power plug
* Multi-chamber tail lights
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor in clamped version
* Preparation in front of the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Split steel side walls - trapezoidal profile - foldable with center folding stanchion
* Steel rear wall can be slid in between the ramps - holder for non-use inside in front of the front wall
* Rear stakes bolted
* Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t quick-lash rings possible every 600 mm
* Lasi package: in the corners at the front and rear each 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the front and end carrier for 1.2 t lashing options
* One-piece slide-in ramps approx. 2,750 x 620 mm
* Approach angle at rear approx. 860 mm
* Chassis, drawbar, front wall, tailgate, folding supports and drive-on ramps hot-dip galvanized
* --- Axles, air tanks, flange eyelet and landing gear painted in a shade of black ---
Iodpomi Tcqefx Ag Istr
* Loading height unladen approx. 940 mm
* Loading height laden approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and interim sale excepted
* Immediately available from Egestorf
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2001
Pateikti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
Mažas skelbimas
Egestorf
924 km
Priekaba su darbo platforma
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Mažas skelbimas
Gralla
1 097 km
Žemagrindė platforma priekaba
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Mažas skelbimas
Bovenden
1 006 km
Žemagrindė platforma priekaba
Müller-MitteltalT 3 Kompakt 30,0, Hydr. Rampen, Verbr. auf 3m
Müller-MitteltalT 3 Kompakt 30,0, Hydr. Rampen, Verbr. auf 3m
Mažas skelbimas
Triptis
941 km
Žemo profilio platforma
FlieglDTS 300 P
FlieglDTS 300 P
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida


































































































