Priekaba su darbo platformaMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit 3 mtr Rampen
Priekaba su darbo platforma
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit 3 mtr Rampen
fiksuota kaina neįskaitant PVM
33 500 €
(39 865 € bruto)
Gamybos metai
2023
Sąlyga
Naujas
Vieta
Egestorf 

Rodyti vaizdus
Rodyti žemėlapį
Pagrindiniai duomenys
Kaina ir vieta
fiksuota kaina neįskaitant PVM
33 500 €
(39 865 € bruto)
- Vieta:
- Eichenstich 12, 21272 Egestorf, Deutschland

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 14 200 kg
- Bendras svoris:
- 19 000 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 7 000 mm
- Krovinių skyriaus plotis:
- 2 470 mm
- Krovos erdvės aukštis:
- 400 mm
Pasiūlymo informacija
- Sąrašo ID:
- A104-33-237
- Nuorodos Nr.:
- 60281
- Naujinta paskutinį kartą:
- Data 2025.06.25
Aprašymas
* ETÜ-TA-R 19.0:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension
* Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm by offset plate
* Jost support winch at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power plug
* LED lights
* Reinforcement package for drilling device transport on the chassis
* 50 mm softwood floor in clamped design
* Fixture in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of steel sheet - trapezoidal profiled - folding down with folding stanchion in the middle
* Steel rear wall, insertable between the ramps - holder for when not in use located inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame bent at approx. 45 degrees with 2 ton lashing capacity every 480 mm
* Installation of 3 ton folding lashing brackets possible every 600 mm
* Lashing package: in the corners at the front and rear 1 x 10 ton UVV lashing ring each, on each side 2 x 8 ton UVV lashing rings retractable in the outer frame, various holes in the front and end carrier for 1.2 ton lashing possibility
* One-piece mechanical grating ramps with spring system for one-man operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm)
* Approach slope at the rear approx. 860 mm
Iodpfx Ajl Tp Azog Isik
* Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized
* Axles, air tanks, flanged towing eye and support winch painted in a shade of black
* Loading height unloaded approx. 940 mm
* Loading height loaded approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side walls painted in RAL 9010 pure white
* Painting of the side walls in an RAL color for an additional charge possible
* Vehicle has a day registration (without use)
* Errors and prior sale reserved
* Immediately available from Egestorf on the A7
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension
* Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm by offset plate
* Jost support winch at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin power plug
* LED lights
* Reinforcement package for drilling device transport on the chassis
* 50 mm softwood floor in clamped design
* Fixture in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of steel sheet - trapezoidal profiled - folding down with folding stanchion in the middle
* Steel rear wall, insertable between the ramps - holder for when not in use located inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame bent at approx. 45 degrees with 2 ton lashing capacity every 480 mm
* Installation of 3 ton folding lashing brackets possible every 600 mm
* Lashing package: in the corners at the front and rear 1 x 10 ton UVV lashing ring each, on each side 2 x 8 ton UVV lashing rings retractable in the outer frame, various holes in the front and end carrier for 1.2 ton lashing possibility
* One-piece mechanical grating ramps with spring system for one-man operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm)
* Approach slope at the rear approx. 860 mm
Iodpfx Ajl Tp Azog Isik
* Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized
* Axles, air tanks, flanged towing eye and support winch painted in a shade of black
* Loading height unloaded approx. 940 mm
* Loading height loaded approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side walls painted in RAL 9010 pure white
* Painting of the side walls in an RAL color for an additional charge possible
* Vehicle has a day registration (without use)
* Errors and prior sale reserved
* Immediately available from Egestorf on the A7
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2001
Pateikti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida











































