Rulonvežis priekabaMÜLLER-MITTELTAL
        18 t.Außenroller Container Anhänger, 2 in 1    
 Rulonvežis priekaba
MÜLLER-MITTELTAL
        18 t.Außenroller Container Anhänger, 2 in 1    
                                                     fiksuota kaina neįskaitant PVM                                            
                                            39 950 €                                    
                        (47 540 € bruto)                    
                Gamybos metai            
                2026            
            Sąlyga        
            Naujas                    
            Vieta        
                                                Egestorf                                            

 Rodyti vaizdus            
 Rodyti žemėlapį            
Pagrindiniai duomenys
Kaina ir vieta
                             fiksuota kaina neįskaitant PVM                    
                            39 950 €                    
                (47 540 € bruto)            
- Pardavėjo vieta:
 -     Eichenstich 12, 21272 Egestorf, Vokietija            

 
 Skambinti            
Techniniai duomenys
- Didžiausias leistinas svoris:
 - 13 700 kg
 
- Bendras svoris:
 - 18 000 kg
 
- Ašių konfigūracija:
 - 2 ašys
 
- Krovimo vietos ilgis:
 - 7 000 mm
 
- Krovinių skyriaus plotis:
 - 2 480 mm
 
Pasiūlymo informacija
- Sąrašo ID:
 - A104-32-598
 
- Nuorodos Nr.:
 - 6029
 
- Naujinta paskutinį kartą:
 - Data 2025.10.24
 
Aprašymas
        * TRA 18.0:
* 2-in-1: suitable for roll-off containers and as low-loader
* TPMS (Tire Pressure Monitoring System)
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 10-ton axles
* Air suspension with manual lowering at the rear
* Drawbar 2,000 mm long with 40 mm towing eye and adjustable height
* Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm and spare wheel holder in basket design on the right side
* Contour marking tape, reflective on sides & rear
* Side underrun protection
Bljdel Tpc Ajpfx Afqep
* Plastic quarter mudguards with spray protection
* Plastic rear bumper pads
* Foldable A-board at the rear
* LED tail lights
* 15-pin electrical connector
* Main frame with raised outer frame for guiding roll-off containers
* Steel floor plate with roller recesses in the bogie area
* Container length from 5,500 to 7,000 mm possible
* Pneumatic 4-point locking system and mechanical locking angles at the front in the guide rail, load securing certificate according to DIN 30722-1
* Lashing package including: 1 pair of 10 t. UVV lashing rings at the front wall carrier and 3 pairs of 10 t. UVV lashing rings on the side outer frame, each side with 4 x 2 t. cloverleaf type lashing eyes and 4 x 8 t. lashing lugs recessed into the outer frame
* Welded seam as anti-slip surface in the ramp area
* Mechanical drop-down supports at the rear
* 1 pair aluminum approach ramps (10.6 t/pair) 2,800 x 470 mm suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear)
* Chassis, bogie, locking components, and rear drop-down supports hot-dip galvanized
* Drawbar, axles, and air tanks finished in black
* New vehicle without initial registration, full manufacturer warranty
* Subject to errors and prior sale
* Available from calendar week 05 / 2026
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
* 2-in-1: suitable for roll-off containers and as low-loader
* TPMS (Tire Pressure Monitoring System)
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 10-ton axles
* Air suspension with manual lowering at the rear
* Drawbar 2,000 mm long with 40 mm towing eye and adjustable height
* Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm and spare wheel holder in basket design on the right side
* Contour marking tape, reflective on sides & rear
* Side underrun protection
Bljdel Tpc Ajpfx Afqep
* Plastic quarter mudguards with spray protection
* Plastic rear bumper pads
* Foldable A-board at the rear
* LED tail lights
* 15-pin electrical connector
* Main frame with raised outer frame for guiding roll-off containers
* Steel floor plate with roller recesses in the bogie area
* Container length from 5,500 to 7,000 mm possible
* Pneumatic 4-point locking system and mechanical locking angles at the front in the guide rail, load securing certificate according to DIN 30722-1
* Lashing package including: 1 pair of 10 t. UVV lashing rings at the front wall carrier and 3 pairs of 10 t. UVV lashing rings on the side outer frame, each side with 4 x 2 t. cloverleaf type lashing eyes and 4 x 8 t. lashing lugs recessed into the outer frame
* Welded seam as anti-slip surface in the ramp area
* Mechanical drop-down supports at the rear
* 1 pair aluminum approach ramps (10.6 t/pair) 2,800 x 470 mm suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear)
* Chassis, bogie, locking components, and rear drop-down supports hot-dip galvanized
* Drawbar, axles, and air tanks finished in black
* New vehicle without initial registration, full manufacturer warranty
* Subject to errors and prior sale
* Available from calendar week 05 / 2026
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
            Pastaba:        Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.    
Registruota nuo: 2001
Pateikti užklausą
Telefonas & Faksas
                            +49 40 33... skelbimai                
 Šie skelbimai taip pat gali jus sudominti.
            Jūsų skelbimas sėkmingai pašalintas            
            Įvyko klaida            



































































