Žemagrindė platforma priekabaMÜLLER-MITTELTAL
19 to. Tandemtieflader mit Auffahrrampen
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL
19 to. Tandemtieflader mit Auffahrrampen
Fiksuota kaina plius PVM
29 950 €
(35 640 € bruto)
Gamybos metai
2026
Būklė
Naujas
Vieta
Egestorf 

Pagrindiniai duomenys
- Pavadinimas:
- Žemagrindė platforma priekaba
- Gamintojas:
- MÜLLER-MITTELTAL
- Gamybos metai:
- 2026
- Būklė:
- naujas
Kaina ir vieta
Fiksuota kaina plius PVM
29 950 €
(35 640 € bruto)
- Pardavėjo vieta:
- Eichenstich 12, 21272 Egestorf, Vokietija

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 14 660 kg
- Bendras svoris:
- 19 000 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 6 270 mm
- Krovinių skyriaus plotis:
- 2 470 mm
- Krovos erdvės aukštis:
- 400 mm
Pasiūlymo informacija
- Skelbimo ID:
- A104-27-177
- Nuorodos numeris:
- 5834
- Atnaujinimas:
- paskutinį kartą atnaujinta 11.06.2026
aprašymas
ETÜ-TA-R 19.0:
----Brakes:
* Wabco EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10-ton BPW Eco axles
----Suspension:
* Parabolic springs - 110 mm wide - with tandem equalizer
----Drawbar / Flange coupling:
* Drawbar with 50 mm flange coupling and height-adjustable drawbar
----Electrical system / Lighting:
* 15-pin power connector
* LED tail lights
* TPMS (Tire Pressure Monitoring System)
Podsl Th Hlspfx Apbjgn
----General components:
* Jost support leg at the front
* Outboard folding supports at the rear
* Side underrun protection
* Plastic quarter fenders
----Low-loader platform:
* 50 mm hardwood flooring
* Mounting point in front of the front wall for subsequent installation of container locking devices
* Bolted front wall made of smooth sheet metal
* Steel side walls - trapezoidal profile - foldable with side rail spring lift
* Steel rear wall that slides in between the ramps - holder when not in use inside the front wall
* Rear crossbars bolted on
----Load securing:
* Perforated outer frame angled at approx. 45 degrees with a lashing force of 2 tons every 480 mm
* Installation of 3-ton drop-side lashing brackets every 600 mm possible
* At the front and rear corners, 1 x 10-ton lashing point each, various holes in the front and end crossmembers for 1.2-ton lashing options
* Profifix lashing rail in the longitudinal axis in the middle for lashing options up to LC 3000 daN
----Ramps:
* One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm)
* Approach angle at the rear approx. 860 mm
----Painting:
* Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized
* Painting of the side walls in RAL 9010 pure white
* Painting of the side walls in an RAL color possible for an extra charge
* Axles, springs, air tank, flange coupling, and support leg painted in a black tone
----Information:
* New vehicle with full manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available for immediate delivery from Egestorf near the A7.
Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.
----Brakes:
* Wabco EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10-ton BPW Eco axles
----Suspension:
* Parabolic springs - 110 mm wide - with tandem equalizer
----Drawbar / Flange coupling:
* Drawbar with 50 mm flange coupling and height-adjustable drawbar
----Electrical system / Lighting:
* 15-pin power connector
* LED tail lights
* TPMS (Tire Pressure Monitoring System)
Podsl Th Hlspfx Apbjgn
----General components:
* Jost support leg at the front
* Outboard folding supports at the rear
* Side underrun protection
* Plastic quarter fenders
----Low-loader platform:
* 50 mm hardwood flooring
* Mounting point in front of the front wall for subsequent installation of container locking devices
* Bolted front wall made of smooth sheet metal
* Steel side walls - trapezoidal profile - foldable with side rail spring lift
* Steel rear wall that slides in between the ramps - holder when not in use inside the front wall
* Rear crossbars bolted on
----Load securing:
* Perforated outer frame angled at approx. 45 degrees with a lashing force of 2 tons every 480 mm
* Installation of 3-ton drop-side lashing brackets every 600 mm possible
* At the front and rear corners, 1 x 10-ton lashing point each, various holes in the front and end crossmembers for 1.2-ton lashing options
* Profifix lashing rail in the longitudinal axis in the middle for lashing options up to LC 3000 daN
----Ramps:
* One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm)
* Approach angle at the rear approx. 860 mm
----Painting:
* Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized
* Painting of the side walls in RAL 9010 pure white
* Painting of the side walls in an RAL color possible for an extra charge
* Axles, springs, air tank, flange coupling, and support leg painted in a black tone
----Information:
* New vehicle with full manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available for immediate delivery from Egestorf near the A7.
Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruotas nuo: 2001
169 Skelbimai internetu
Siųsti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
Mažas skelbimas
Egestorf
924 km
Priekaba su darbo platforma
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida













































































