Žemagrindė platforma priekabaMÜLLER-MITTELTAL
14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Žemagrindė platforma priekaba
MÜLLER-MITTELTAL
14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Fiksuota kaina plius PVM
28 500 €
(33 915 € bruto)
Gamybos metai
2026
Būklė
Naujas
Vieta
Egestorf 

Pagrindiniai duomenys
- Pavadinimas:
- Žemagrindė platforma priekaba
- Gamintojas:
- MÜLLER-MITTELTAL
- Gamybos metai:
- 2026
- Būklė:
- naujas
Kaina ir vieta
Fiksuota kaina plius PVM
28 500 €
(33 915 € bruto)
- Pardavėjo vieta:
- Eichenstich 12, 21272 Egestorf, Vokietija

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 10 900 kg
- Bendras svoris:
- 14 400 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 5 000 mm
- Krovinių skyriaus plotis:
- 2 420 mm
- Krovos erdvės aukštis:
- 500 mm
Pasiūlymo informacija
- Skelbimo ID:
- A104-27-096
- Nuorodos numeris:
- 57761
- Atnaujinimas:
- paskutinį kartą atnaujinta 16.07.2026
aprašymas
* KA-TA-R 14.4
----Brakes:
* Wabco EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 tons Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable, hot-dip galvanized drawbar by 300 mm with a 40 mm flange coupling
----General components:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding supports at the rear
* Hot-dip galvanized bolted underrun protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter fenders
* 2-step step on the left side as an aid for getting on
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* 15-pole power connector
* LED tail lights
----Tipping bridge:
* Steel, 3-sided tipping body
* Continuous side walls at the top with internal tube reinforcement - without center posts - foldable with side wall spring supports
* Foldable and pivoting tailgate via manual central locking
* Hot-dip galvanized bolted rear posts
* 4 mm fine-grained steel floor
* Lashing hooks, receiving rail at the rear for loading ramps
* Preparation for later retrofitting of side wall extensions
Bdsdol Th A Ejpfx Anvef
----Chassis:
* Hot-dip galvanized chassis
----Load securing:
* 1 x 5 tons lashing point in each corner and 4 x 3 tons lashing eyes on each side, embedded in the outer frame
----ALU loading ramps:
* 1 pair of ALU loading ramps approx. 3,570 x 400 mm (load capacity 8 tons / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment at the rear below the loading area, embedded in the chassis
----Tires:
* Tires 385/55 R 22.5
----Painting:
* The axles, springs, air tanks and landing gear are painted in a black tone.
* Chassis, drawbar, floor, front panel, folding supports are hot-dip galvanized.
* Painting of the side walls in RAL 9010 pure white.
* Painting of the side walls in an RAL color against surcharge possible.
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle without initial registration with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available from approx. week 45/2026
Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.
----Brakes:
* Wabco EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 tons Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable, hot-dip galvanized drawbar by 300 mm with a 40 mm flange coupling
----General components:
* Jost mechanical landing gear at the front
* 2 mechanical, hot-dip galvanized folding supports at the rear
* Hot-dip galvanized bolted underrun protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter fenders
* 2-step step on the left side as an aid for getting on
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* 15-pole power connector
* LED tail lights
----Tipping bridge:
* Steel, 3-sided tipping body
* Continuous side walls at the top with internal tube reinforcement - without center posts - foldable with side wall spring supports
* Foldable and pivoting tailgate via manual central locking
* Hot-dip galvanized bolted rear posts
* 4 mm fine-grained steel floor
* Lashing hooks, receiving rail at the rear for loading ramps
* Preparation for later retrofitting of side wall extensions
Bdsdol Th A Ejpfx Anvef
----Chassis:
* Hot-dip galvanized chassis
----Load securing:
* 1 x 5 tons lashing point in each corner and 4 x 3 tons lashing eyes on each side, embedded in the outer frame
----ALU loading ramps:
* 1 pair of ALU loading ramps approx. 3,570 x 400 mm (load capacity 8 tons / pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment at the rear below the loading area, embedded in the chassis
----Tires:
* Tires 385/55 R 22.5
----Painting:
* The axles, springs, air tanks and landing gear are painted in a black tone.
* Chassis, drawbar, floor, front panel, folding supports are hot-dip galvanized.
* Painting of the side walls in RAL 9010 pure white.
* Painting of the side walls in an RAL color against surcharge possible.
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle without initial registration with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available from approx. week 45/2026
Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruotas nuo: 2001
171 Skelbimai internetu
Siųsti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
Mažas skelbimas
Egestorf
925 km
Trijų pusių savivartis priekaba
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
MÜLLER-MITTELTAL14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5
Mažas skelbimas
Triptis
941 km
Savivartis 3 krypčių
FlieglTLK 118
FlieglTLK 118
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida




























































