Trijų pusių savivartis priekabaMÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Trijų pusių savivartis priekaba
MÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
fiksuota kaina neįskaitant PVM
28 500 €
(33 915 € bruto)
Gamybos metai
2024
Sąlyga
Naujas
Vieta
Egestorf 

Rodyti vaizdus
Rodyti žemėlapį
Pagrindiniai duomenys
- Pavadinimas:
- Trijų pusių savivartis priekaba
- Gamintojas:
- MÜLLER-MITTELTAL
- Gamybos metai:
- 2024
- Sąlyga:
- naujas
Kaina ir vieta
fiksuota kaina neįskaitant PVM
28 500 €
(33 915 € bruto)
- Pardavėjo vieta:
- Eichenstich 12, 21272 Egestorf, Vokietija

Skambinti
Techniniai duomenys
- Didžiausias leistinas svoris:
- 8 620 kg
- Bendras svoris:
- 11 900 kg
- Ašių konfigūracija:
- 2 ašys
- Krovimo vietos ilgis:
- 5 500 mm
- Krovinių skyriaus plotis:
- 2 420 mm
- Krovos erdvės aukštis:
- 500 mm
Pasiūlymo informacija
- Sąrašo ID:
- A104-27-000
- Nuorodos Nr.:
- 5892
- Naujinta paskutinį kartą:
- Data 2026.01.13
Aprašymas
* KA-TA-R 11.9:
----Brakes:
* Electronic Braking System (EBS)
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem equaliser unit
----Drawbar / Flange Eye:
* Height-adjustable, hot-dip galvanised drawbar, adjustable by 300 mm, with 40 mm flange eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS)
* 15-pin power connector
* LED tail lights
----General Attachments:
* Jost mechanical landing gear at the front
* Rear: 2 mechanical, hot-dip galvanised folding support legs
* Tool box made of galvanised sheet steel, mounted on the right side
* Hot-dip galvanised, bolted underrun protection
* Plastic quarter mudguards
----Tipper Platform:
* Net hooks on the sides and rear integrated into the central locking brackets, plus 3 hooks on the front wall
* Hot-dip galvanised chassis
* 3-way tipping steel platform for pallets
* Continuous drop sides without intermediate stanchions, foldable with drop side spring loaders
* Rear drop gate can be folded down or operated in pendulum mode via manual central locking
* Bolted, hot-dip galvanised rear stanchions
* 4 mm steel floor plate
* Prepared for retrofitting of drop side extensions
* 5.5 metre-long platform
----Load Securing:
* Each corner fitted with 1 x 5 t lashing ring
* 4 x 3 t lashing rings integrated into the outer frame on each side
----Ramps:
* Rear guide rails for loading ramps
* 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading area at the rear, integrated into the chassis
Fjdpfx Afsl Thx Eoiopc
----Wheelbase:
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in a shade of black
* Platform superstructure colour: RAL 9010 pure white
* Painting of the side walls and tipping platform in an RAL colour tone available at extra cost
----Information:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available immediately ex works Egestorf (A7 motorway)
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
----Brakes:
* Electronic Braking System (EBS)
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axles
----Suspension:
* Parabolic springs with tandem equaliser unit
----Drawbar / Flange Eye:
* Height-adjustable, hot-dip galvanised drawbar, adjustable by 300 mm, with 40 mm flange eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS)
* 15-pin power connector
* LED tail lights
----General Attachments:
* Jost mechanical landing gear at the front
* Rear: 2 mechanical, hot-dip galvanised folding support legs
* Tool box made of galvanised sheet steel, mounted on the right side
* Hot-dip galvanised, bolted underrun protection
* Plastic quarter mudguards
----Tipper Platform:
* Net hooks on the sides and rear integrated into the central locking brackets, plus 3 hooks on the front wall
* Hot-dip galvanised chassis
* 3-way tipping steel platform for pallets
* Continuous drop sides without intermediate stanchions, foldable with drop side spring loaders
* Rear drop gate can be folded down or operated in pendulum mode via manual central locking
* Bolted, hot-dip galvanised rear stanchions
* 4 mm steel floor plate
* Prepared for retrofitting of drop side extensions
* 5.5 metre-long platform
----Load Securing:
* Each corner fitted with 1 x 5 t lashing ring
* 4 x 3 t lashing rings integrated into the outer frame on each side
----Ramps:
* Rear guide rails for loading ramps
* 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment under the loading area at the rear, integrated into the chassis
Fjdpfx Afsl Thx Eoiopc
----Wheelbase:
* Wheelbase: 990 mm
----Tyres:
* Tyres: 235/75R17.5
----Paintwork:
* Axles, springs, air tanks, drawbar and landing gear painted in a shade of black
* Platform superstructure colour: RAL 9010 pure white
* Painting of the side walls and tipping platform in an RAL colour tone available at extra cost
----Information:
* Reinforced superstructure with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available immediately ex works Egestorf (A7 motorway)
Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.
Tiekėjas
Pastaba: Užsiregistruokite nemokamai arba prisijunkite, kad gautumėte visą informaciją.
Registruota nuo: 2001
Pateikti užklausą
Telefonas & Faksas
+49 40 33... skelbimai
Šie skelbimai taip pat gali jus sudominti.
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida




















































